相关论文: A new approach for improving global critical curre…

We reported a controllable way of removing excess Fe in Fe1+yTe0.6Se0.4 by annealing in a fixed amount of O2. Compared with the weak superconductivity induced by dilute acids, O2 annealing can successfully induce bulk superconductivity.…

Single crystals of K0.58Fe1.56Se2 were successfully synthesized by a new single step process with the onset superconducting transition temperatures 31.9 K. The x-ray diffraction patterns suggest that they have high crystalline quality and…

We have prepared high-quality polycrystalline FeTe0.5Se0.5 at temperature as low as 550{\deg}C. The transport critical current density evaluated by the current-voltage characteristics is over 700 A/cm2 at 4.2 K under zero field, which is…

Polycrystalline MgB2 samples with GaN additions were prepared by reaction of Mg, B, and GaN powders. The presence of Ga leads to a low melting eutectic phase which allowed liquid phase sintering and produces plate-like grains. For low-level…

Iron telluride-selenium superconducting materials, known for their non-toxicity, ease of preparation, simple structure, and high upper critical fields, have attracted much research interest in practical application. In this work, we…

We report on structural, magnetic, conductivity, and thermodynamic studies of FeSe$_{0.5}$Te$_{0.5}$ single crystals grown by self-flux and Bridgman methods. The samples were prepared from starting materials of different purity at various…

By using post-annealing and quenching technique, we show that the critical current density Jc,ab of KxFe2-ySe2 single crystals can be enhanced more than one order of magnitude up to ~ 2.1 \times 10^4 A/cm^2 at 1.8 K. The scaling law between…

We fabricated (Ba,Na)Fe2As2 superconducting wires using the powder-in-tube method and hot isostatic pressing. By improving powder synthesis processes compared with previous studies, highly pure raw materials for the wire fabrication were…

Phase-pure polycrystalline Ba0.6K0.4+xFe2As2 with were prepared using a one-step solid-state reaction method. We found that over-doping of potassium can improve critical current density (Jc). High-field Jc for samples with x = 0.1 is three…

Tremendous efforts towards improvement in the critical current density (Jc) of iron based superconductors (FeSCs), especially at relatively low temperatures and magnetic fields, have been made so far through different methods, resulting in…

The critical current density has been measured on single crystals of Ru substituted BaFe2As2 superconductor at several temperatures and in fields up to 16 T. The magnetisation versus field isotherms reveal the occurrence of a clear second…

A high density CaKFe$_4$As$_4$ bulk sample was successfully synthesized using a spark plasma sintering (SPS) technique. The density of the synthesized sample was 5.02 g cm$^{-3}$, corresponding to 96.2% of the theoretical density of…

A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting…

We report on measurements of the superconducting properties of FeSe05Te05 thin films grown on lanthanum aluminate. The films have high transition temperatures (above 19 K) and sharp resistive transitions in fields up to 15 T. The…

Fe-clad MgB2 long tapes have been fabricated using a powder-in-tube technique. An Mg + 2B mixture was used as the central conductor core and reacted in-situ to form MgB2. The tapes were sintered in pure Ar at 800 ^(o) C for 1 h at ambient…

The critical current densities of polycrystalline bulk SmFeAsO$_{1-x}$F$_x$ prepared by the powder-in-tube (PIT) method and by a conventional solid-state reaction were investigated using the remnant magnetic moment method and Campbell's…

We have established a simple process that allows for the one-step synthesis of KxFe2-ySe2 single crystals, which exhibit high critical current density Jc. The post annealing and quenching technique has improved the homogeneity of as-grown…

Single crystalline FeTe$_{0.61}$Se$_{0.39}$ with a sharp superconducting transition at $T_{\textrm{c}} \sim$ 14 K is synthesized via slow furnace cooling followed by low-temperature annealing. The effect of annealing on the chemical and…

FeTe0.5Se0.5 superconducting wires have been fabricated using ex-situ PIT method with an Fe sheath. Among the other FeAs-based superconductor, FeTe0.5Se0.5 has great advantage for application due to binary composition and less toxic.…

The pressure dependence, up to 11.3 kbar, of basic parameters of the superconducting state, such as the critical temperature (Tc), the lower and the upper critical fields, the coherence length, the penetration depth, and their anisotropy,…