相关论文: Facile fabrication of suspended as-grown carbon na…

Optical emission from carbon nanotube transistors (CNTFETs) has recently attracted significant attention due to its potential applications. In this paper, we use a self-consistent numerical solution of the Boltzmann transport equation in…

Using low-resistance electrical contacts, we have measured the intrinsic high-field transport properties of metallic single-wall carbon nanotubes. Individual nanotubes appear to be able to carry currents with a density exceeding 10^9…

We report on the influence of low gamma irradiation (10^4 Gy) on the noise properties of individual carbon nanotube (CNT) field-effect transistors (FETs) with different gate configurations and two different dielectric layers, SiO2 and…

Carbon nanotube field-effect transistors (CNFETs) are promising candidates for building energy-efficient digital systems at highly-scaled technology nodes. However, carbon nanotubes (CNTs) are inherently subject to variations that reduce…

We demonstrate a class of model nano-electromechanical systems (NEMS) based on multiwalled carbon nanotubes (MWNTs) which has longer inner cores coaxially oscillating inside their respective shorter outer shell holders and can operate at…

AFM manipulation was used to controllably stretch individual metallic single-walled carbon nanotubes (SWNTs). We have found that SWNTs can sustain elongations as great as 30% without breaking. Scanned gate microscopy and transport…

Single wall carbon nanotubes cooled to cryogenic temperatures are outstanding electronic as well as nano-electromechanical model systems. To probe a largely unperturbed system, we measure a suspended carbon-nanotube device where the…

Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density,…

A mechanically bistable single-walled carbon nanotube can act as a variable-shaped capacitor with a voltage-controlled transition between collapsed and inflated states. This external control parameter provides a means to tune the system so…

We report on a new computational model to efficiently simulate carbon nanotubebased field effect transistors (CNT-FET). In the model, a central region is formed by a semiconducting nanotube that acts as the conducting channel, surrounded by…

We demonstrate wafer-scale integration of single electron memories based on carbon nanotube field effect transistors (cnfets) by a complete self assembly process. First, a dry self assembly based on a Hot Filament assisted Chemical Vapor…

We experimentally demonstrate laser-driven deposition of single-walled carbon nanotubes (CNTs) in suspended core fibers (SCFs) for the first time. Two samples for each SCF type with three (SCF1) and four (SCF2) air holes are individually…

We report on ac transport through carbon nanotube Fabry-Perot devices. We show that tuning the intensity of the ac gating induces an alternation of suppression and partial revival of the conductance interference pattern. For frequencies…

Carbon nanotube field-effect transistor (CNTFET) refers to a field-effect transistor that utilizes a single carbon nanotube or an array of carbon nanotubes as the channel material instead of bulk silicon in the traditional MOSFET structure.…

Field electron emission (FE) from a structure-defined single-walled carbon nanotube (SWNT) was observed experimentally. A series of observations of the same SWNT by scanning electron microscopy, field emission microscopy and transmission…

An investigation concerning the tautness of suspended carbon nanotubes (CNTs), grown using the chemical vapor deposition (CVD) method is presented. The suspended nanotubes were analyzed with both a transmission electron microscope (TEM),…

Carbon nanotube field-effect transistors operate over a wide range of electron or hole density, controlled by the gate voltage. Here we calculate the mobility in semiconducting nanotubes as a function of carrier density and electric field,…

We describe a hybrid quantum system composed of a micrometer-size carbon nanotube (CNT) longitudinally coupled to a flux qubit. We demonstrate the usefulness of this device for generating high-fidelity nonclassical states of the CNT via…

The unique topology and exceptional properties of carbon nanoscrolls (CNSs) have inspired unconventional nano-device concepts, yet the fabrication of CNSs remains rather challenging. Using molecular dynamics simulations, we demonstrate the…

Carbon nanotubes (CNTs) are a promising material for high-performance electronics beyond silicon. But unlike silicon, the nature of the transport band gap in CNTs is not fully understood. The transport gap in CNTs is predicted to be…