相关论文: Resistivity of Graphene Nanoribbon Interconnects

Graphene nanoribbons (GNRs) with widths down to 16 nm have been characterized for their current-carrying capacity. It is found that GNRs exhibit an impressive breakdown current density, on the order of 10^8 A/cm2. The breakdown current…

The performance limits of the multilayer graphene nanoribbon (GNR) field-effect transistor (FET) are assessed and compared to those of monolayer GNR FET and carbon nanotube (CNT) FET. The results show that with a thin high-k gate insulator…

Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show…

Graphene nanoribbons have attracted attention for their novel electronic and spin transport properties1-6, and because nanoribbons less than 10 nm wide have a band gap that can be used to make field effect transistors. However, producing…

Sub-10nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10^6 and on-state current density as high as…

The size-dependent electrical resistivity of single-layer graphene ribbons has been studied experimentally for ribbon widths from 16 nm to 320 nm. The experimental findings are that the resistivity follows a more dramatic trend than that…

We have studied the resistivity of a large number of highly oriented graphite samples with areas ranging from several mm$^2$ to a few $\mu$m$^2$ and thickness from $\sim 10 $nm to several tens of micrometers. The measured resistance can be…

Graphene has shown impressive properties for nanoelectronics applications including a high mobility and a width-dependent bandgap. Use of graphene in nanoelectronics would most likey be in the form of graphene nanoribbons (GNRs) where the…

We investigate high-field transport in graphene nanoribbons (GNRs) on SiO2, up to breakdown. The maximum current density is limited by self-heating, but can reach >3 mA/um for GNRs ~15 nm wide. Comparison with larger, micron-sized graphene…

Graphene nanoribbons (GNRs) are a family of one-dimensional (1D) materials carved from graphene lattice. GNRs possess high mobility and current carrying capability, sizable bandgap, and versatile electronic properties tailored by the…

The performance of graphene-based transistors is often limited by the large electrical resistance across the metal-graphene contact. We report an approach to achieve ultra-low resistance metal contacts to graphene transistors. Through a…

Creating a good contact between electrodes and graphene nanoribbons (GNRs) has been a longstanding challenge in searching for the next GNR-based nanoelectronics. This quest requires the controlled fabrication of sub-20 nm metallic gaps, a…

We have fabricated graphene nano-ribbon field-effect transistor devices and investigated their electrical properties as a function of ribbon width. Our experiments show that the resistivity of a ribbon increases as its width decreases,…

Graphene nanoribbons (GNRs) produced by means of bottom-up chemical self-assembly are considered promising candidates for the next-generation nanoelectronic devices. We address the electronic transport properties of angled two-terminal GNR…

Conductance fluctuation is usually unavoidable in graphene nanoribbons (GNR) due to the presence of disorder along its edges. By measuring the low-frequency noise in GNR devices, we find that the conductance fluctuation is strongly…

Carbon-based nanostructures and graphene, in particular, evoke a lot of interest as new promising materials for nanoelectronics and spintronics. One of the most important issue in this context is the impact of external electrodes on…

The magnetoconductance of graphene nanoribbons with rough zigzag and armchair edges is studied by numerical simulations. nanoribbons with sufficiently small bulk disorder show a pronounced magnetoconductance minimum at cyclotron radii close…

The strong non-linear increase in Cu interconnect line resistance with a decrease in linewidth presents a significant obstacle to their continued downscaling. In this letter we use first principles density functional theory based electronic…

Graphene has attracted much attention as one of promising candidates of future high-speed transistor materials because of its high carrier mobility of more than 10,000 cm2 V-1 s-1. Up to this point, we have focused on the contact properties…

One of the ways to use graphene in field effect transistors is to introduce a band gap by quantum confinement effect [1]. That is why narrow graphene nanoribbons (GNRs) with width less than 50nm are considered to be essential components in…