相关论文: A Comparative Study of Parallel Kinematic Architec…
Using an experimental optimization approach, this study investigated whether two human movements, pointing tasks and squat-jumps, could be modelled with a reduced set of kinematic parameters. Three sigmoid models were proposed to model the…
We introduce an extended framework for the simultaneous gauging of modulated symmetries in $(d+1)$ dimensions, employing {\it multiple} gauge symmetry operators whose corresponding gauging procedures must be carried out simultaneously.…
To reduce the contour error of the end-effector of a robotic manipulator during trajectory tracking, a dual-mode synchronization predictive control is proposed. Firstly, the dynamic model of n-DoF robotic manipulator is discretized by using…
This paper deals with the kinematic and dynamic analyses of the Orthoglide 5-axis, a five-degree-of-freedom manipulator. It is derived from two manipulators: i) the Orthoglide 3-axis; a three dof translational manipulator and ii) the Agile…
The shoulder is responsible for the movement of the entire upper limb. It is capable of articulating in three degrees-of-freedom (DOF), enabling the arm to perform manipulation actions with incomparable dexterity. Exoskeletons targeting the…
Parallel kinematic manipulators (PKM) are characterized by closed kinematic loops, due to the parallel arrangement of limbs but also due to the existence of kinematic loops within the limbs. Moreover, many PKM are built with limbs…
Parallel Continuum Robots (PCR) are closed-loop mechanisms but use elastic kinematic links connected in parallel between the end-effector (EE) and the base platform. PCRs are actuated primarily through large deflections of the…
The growing need to automate processes in industrial settings has led to tremendous growth in the robotic systems and especially the robotic arms. The paper assumes the design, modeling and control of a robotic arm to suit industrial…
Inverse Kinematics (IK) solves the problem of mapping from the Cartesian space to the joint configuration space of a robotic arm. It has a wide range of applications in areas such as computer graphics, protein structure prediction, and…
This paper presents a 3-DOF hopping robot with a human-like lower-limb joint configuration and a flat foot, capable of performing dynamic and repetitive jumping motions. To achieve both high torque output and a large hollow shaft diameter…
The paper proposes a novel approach for the geometrical model calibration of quasi-isotropic parallel kinematic mechanisms of the Orthoglide family. It is based on the observations of the manipulator leg parallelism during motions between…
This paper proposes a framework that optimizes the linkage mechanism of the quasi-serial manipulator for target tasks. This process is explained through a case study of 2-degree-of-freedom linkage mechanisms, which significantly affect the…
We fully generalize a previously-developed computational geometry tool [1] to perform large-scale simulations of arbitrary two-dimensional faceted surfaces $z = h(x,y)$. Our method uses a three-component facet/edge/junction storage model,…
A class of analytic planar 3-RPR manipulators is analyzed in this paper. These manipulators have congruent base and moving platforms and the moving platform is rotated of 180 deg about an axis in the plane. The forward kinematics is reduced…
This paper analyses the workspace of the three-revolute orthogonal manipulators that have at least one of their DH parameters equal to zero. These manipulators are classified into different groups with similar kinematic properties. The…
As the pace of AI technology continues to accelerate, more tools have become available to researchers to solve longstanding problems, Hybrid approaches available today continue to push the computational limits of efficiency and precision.…
This paper discusses the utility of using simple stiffness and vibrations models, based on the Jacobian matrix of a manipulator and only the rigidity of the actuators, whenever its geometry is optimised. In many works, these simplified…
Real-life parallel machine scheduling problems can be characterized by: (i) limited information about the exact task duration at scheduling time, and (ii) an opportunity to reschedule the remaining tasks each time a task processing is…
This paper present a novel dual-speed actuator adapted to robotics. In many applications, robots have to bear large loads while moving slowly and also have to move quickly through the air with almost no load. This lead to conflicting…
The aim of this work is to study the geometry underlying mechanics and its application to describe autonomous and nonautonomous conservative dynamical systems of different types; as well as dissipative dynamical systems. We use different…