Related papers: MgB2 tunnel junctions with native or thermal oxide…
Since the discovery of superconductivity in MgB2 considerable progress has been made in determining the physical properties of the material, which are promising for bulk conductors. Tunneling studies show that the material is reasonably…
High quality Nb-based superconductor-insulator-superconductor (SIS) junctions with Al oxide (AlO$_x$) tunnel barriers grown from Al overlayers are widely reported in the literature. However, the thin barriers required for high critical…
Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we…
We investigated the dependence of giant tunnel magnetoresistance (TMR) on the thickness of an MgO barrier and on the annealing temperature of sputtered CoFeB/MgO/CoFeB magnetic tunnel junctions deposited on SiO2/Si wafers. The…
Precursor MgB2 thin films were prepared on sapphire substrates by magnetron sputtering. Influence of ex-situ annealing process on superconducting MgB2 thin films roughness is discussed. Optimized annealing process of MgB precursor thin…
A Hybrid Physical-Chemical Vapour Deposition (HPCVD) system consisting of separately controlled Mg-source heater and substrate heater is used to grow MgB2 thin films and thick films at various temperatures. We are able to grow…
The discovery of a two-dimensional electron gas (2DEG) at the interface between insulating oxides has led to a well-deserved level of excitement due to possible applications as "in-plane" all-oxide nanoelectronics. Here we expand the range…
Magnetite (Fe3O4) based tunnel junctions with turret/mesa structure have been investigated for different barrier materials (SrTiO3, NdGaO3, MgO, SiO2, and Al2O(3-x)). Junctions with a Ni counter electrode and an aluminium oxide barrier…
The review considers bulk MgB2-based materials in terms of their structure, superconducting and mechanical properties. Superconducting transition temperatures of 34.5-39.4 K, critical current densities of 1.8-1.0 x E6 A/sq.cm in self field…
We demonstrate a technique for creating high quality, large area tunnel junction barriers for normal-insulating- superconducting or superconducting-insulating-superconducting tunnel junctions. We use atomic layer depo- sition and an…
A tunneling spectroscopy study is presented of superconducting MoN and Nb$_{0.8}$Ti$_{0.2}$N thin films grown by atomic layer deposition (ALD). The films exhibited a superconducting gap of 2meV and 2.4meV respectively with a corresponding…
Perpendicular magnetic tunnel junction with MgAl2O4 barrier is investigated. It is found that reactive RF sputtering with O2 is essential to obtain strong perpendicular magnetic anisotropy and large tunneling magnetoresistance in…
Surface oxidation of the bottom ferromagnetic (FM) electrode, one of the major detrimental factors to the performance of a Magnetic Tunnel Junction (MTJ), is difficult to avoid during the fabrication process of the MTJ's tunnel barrier.…
We report a Nb/Al-AlN /Nb superconducting tunnel junction process in which the AlN barrier is formed by plasma nitridation using a compact microwave electron-cyclotron-resonance (ECR) nitrogen plasma source integrated into a standard…
In this letter, we report the first successful fabrication of dense, metal-clad MgB2 superconductor wires as well as the first demonstration of high transport Jc of greater than 36,000 A/cm2 in MgB2. The fabrication technique that we…
A magnetic tunnel junctions composed of room temperature ferromagnetic semiconductor rutile Ti1-xCoxO2-d and ferromagnetic metal Fe0.1Co0.9 separated by AlOx barrier showed positive tunneling magnetoresistance (TMR) with a ratio of ~11 % at…
We investigate electronic transport in epitaxial Fe(100)/MgO/Fe/MgO/Fe double magnetic tunnel junctions with soft barrier breakdown (hot spots). Specificity of these junctions are continious middle layer and Nitrogen doping of the MgO…
Magnetic tunnel junctions with Fe1+xCo2-xSi (0 < x < 1) electrodes and MgO barrier were prepared on MgO substrates by magnetron co-sputtering. Maximum tunnel magnetoresistance (TMR) ratios of 262 % at 15 K and 159 % at room temperature were…
Single crystals of MgB2 have been grown with a high-pressure cubic anvil technique. They grow via the peritectic decomposition of the MgNB9 ternary nitride. The crystals are of a size up to 2x1x0.1mm3 with a weight up to 230 micrograms.…
We investigate the influence of the barrier thickness of Co$_{40}$Fe$_{40}$B$_{20}$ based magnetic tunnel junctions on the laser-induced tunnel magneto-Seebeck effect. Varying the barrier thickness from 1nm to 3nm, we find a distinct…