相关论文: Planar Solidification from Undercooled Melt: An Ap…
In this paper we present a balanced phase field model for active surfaces. This work is devoted to the generalization of the Balanced Phase Field Model for Active Contours devised to eliminate the often undesirable curvature-dependent…
When a substance that shrinks in volume as it solidifies (for example, lead) is melted in a container and then cooled, a deep hole is often found in the center after resolidification. We use a simple model to describe the shape of the pipe…
A two PDEs-based model is developed for studies of a morphological and compositional evolution of a thermodynamically stable alloy surface in a strong electric field, assuming different and anisotropic diffusional mobilities of the two…
Lattice mismatch can substantially impact the spatial organization of heterogeneous materials. We examine a simple model for lattice-mismatched solids over a broad range of temperature and composition, revealing both uniform and spatially…
We characterize both analytically and numerically short-range forces between spatially diffuse interfaces in multi-phase-field models of polycrystalline materials. During late-stage solidification, crystal-melt interfaces may attract or…
Models of adhesion of extended particles on linear and planar substrates are of interest in interpreting surface deposition in colloid, polymer, and certain biological systems. An introduction is presented to recent theoretical advances in…
We construct a diffuse-interface model of two-phase solidification that quantitatively reproduces the classic free boundary problem on solid-liquid interfaces in the thin-interface limit. Convergence tests and comparisons with boundary…
Laser-based additive manufacturing offers a promising route for 3D printing of metallic parts. We evidence experimentally a particular columnar solidification microstructure in a Laser Powder-Bed Fusion processed Inconel 718 nickel-based…
We study the existence of reproductive weak solutions for a system of equations describing a solidification process of a binary alloy confined into a bounded and regular domain in $\mathbb{R}^3$, having mixed boundary conditions.
We consider a thin heterogeneous layer consisted of the thin beams (of radius $r$) and we study the limit behaviour of this problem as the periodicity $\varepsilon$, the thickness $\delta$ and the radius $r$ of the beams tend to zero. The…
A two-phase solidification process for a one-dimensional semi-infinite material is considered. It is assumed that it is ensued from a constant bulk temperature present in the vicinity of the fixed boundary, which it is modelled through a…
A thermodynamic approach to rapid phase transformations within a diffuse interface in a binary system is developed. Assuming an extended set of independent thermodynamic variables formed by the union of the classic set of slow variables and…
Phase field crystal (PFC) models constitute a field theoretical approach to solidification, melting and related phenomena at atomic length and diffusive time scales. One of the advantages of these models is that they naturally contain…
It is found experimentally that the coexistence region of a vapor-liquid system or a binary mixture is substantially narrowed when the fluid is confined in a aerogel with a high degree of porosity (e.g. of the order of 95% to 99%). A…
The Rayleigh--Taylor instability of two immiscible fluids in the limit of small Atwood numbers is studied by means of a phase-field description. In this method the sharp fluid interface is replaced by a thin, yet finite, transition layer…
Most studies on melting under confinement focus only on the solid and liquid melt phases. Despite of its ubiquity, contributions from the capillary interface (liquid / vapor interface) are often neglected. In this study the melting behavior…
We discuss the interplay between a slow continuous drift of temperature, which induces continuous phase separation, and the non-linear diffusion term in the $\phi^4$-model for phase separation of a binary mixture. This leads to a bound for…
We describe a general phase-field model for hyperelastic multiphase materials. The model features an elastic energy functional that depends on the phase-field variable and a surface energy term that depends in turn on the elastic…
The liquid-liquid phase separation of a binary solvent can be arrested by colloidal particles trapped at the interface [K. Stratford et al., Science 309, 5744 (2005)]. We show experimentally that the colloidal network so formed can remain…
A colloidal particle placed in an inhomogeneous solution of smaller non-adsorbing polymers will move towards regions of lower polymer concentration, in order to reduce the free energy of the interface between the surface of the particle and…