相关论文: Anomalous, pre-yield grain-boundary sliding in cop…
Previous studies demonstrate that grain-boundary sliding could accelerate creep rate and give rise to large internal stresses that can lead to damage development, e.g. formation of wedge cracks. The present study provides more insight into…
A multi-phase field model is employed to study the microstructural evolution of an alloy undergoing liquid dealloying. The model proposed extends upon the original approach of Geslin et al. to consider dealloying in the presence of grain…
Grain rotation and grain boundary (GB) sliding are two important mechanisms for grain coarsening and plastic deformation in nanocrystalline materials. They are in general coupled with GB migration and the resulting dynamics, driven by…
Grain Boundary (GB) deformation mechanisms such as Sliding (GBS) and Opening (GBO) are prevalent in alloys at high homologous temperatures but are hard to capture quantitatively. We propose an automated procedure to quantify 3D GB…
The initiation of intergranular corrosion at various types of grain boundaries (GBs) was studied at the nanometer scale on microcrystalline copper in 1 mM HCl aqueous solution. In situ Electrochemical Scanning Tunneling Microscopy (ECSTM)…
Grain boundary sliding (GBS) is a key deformation mechanism at high homologous temperatures in polycrystalline materials, however, its intrinsic behavior is often obscured by additional strain accommodation processes. In this study,…
Degradation of mechanical properties of zirconia polycrystals is hardly discussed in terms of solution-precipitation grain-boundary sliding due to experimental controversies over imaging of intergranular amorphous phases at high and room…
We study numerically and analytically the coarsening of stripe phases in two spatial dimensions, and show that transient configurations do not achieve long ranged orientational order but rather evolve into glassy configurations with very…
Slip transfer across grain boundaries was studied in annealed polycrystalline Al foils deformed in uniaxial tension by means of the analysis of the slip traces on the specimen surface. Grain orientations and selected grain boundary…
The phase behavior of grain boundaries can have a strong influence on interfacial properties. Little is known about the emergence of grain boundary phases in elemental metal systems and how they transform. Here, we observe the nanoscale…
This study investigates the boundary migration mechanisms near the sample surface of recrystallizing grains in high-purity Al subjected to cryogenic rolling. Local strain and stress tensors were characterized during \textit{in situ}…
Grain boundaries in ultrafine grained (UFG) materials processed by severe plastic deformation (SPD) are often called "non-equilibrium" grain boundaries. Such boundaries are characterized by excess grain boundary energy, presence of long…
We use confocal microscopy and time-resolved light scattering to investigate plasticity in a col- loidal polycrystal, following the evolution of the network of grain boundaries as the sample is submitted to thousands of shear deformation…
A yield surface of a material is a set of critical stress conditions beyond which macroscopic plastic deformation begins. For crystalline solids, plastic deformation occurs through the motion of dislocations, which can be captured by…
Using a phase-field model, we study the surface diffusion-controlled grooving of a moving grain boundary under the influence of an external magnetic field in thin films of a nonmagnetic material. The driving force for the grain boundary…
Grain growth is a key process in the thermomechanical treatment of metals. Recently, the presence of local residual stresses within fully recrystallized grains has attracted increasing interest in connection with shear-coupled grain…
In situ Electro-Chemical Scanning Tunneling Microscopy (ECSTM) and Electron Back-Scatter Diffraction analysis of the same local microstructural region were combined to study the relationships between grain boundary (GB) type and structure…
Dislocation and grain boundary melting are studied in three dimensions using the Phase Field Crystal method. Isolated dislocations are found to melt radially outward from their core, as the localized excess elastic energy drives a power law…
Synchrotron Laue microdiffraction and Digital Image Correlation measurements were coupled to track the elastic strain field (or stress field) and the total strain field near a general grain boundary in a bent bicrystal. A 316L stainless…
Grain boundary diffusion in severely deformed Al-based AA5024 alloy is investigated. Different states are prepared by combination of equal channel angular processing and heat treatments, with the radioisotope $^{57}$Co being employed as a…