相关论文: Digital-Alloy Bragg Mirrors in High-Q Microcavitie…

We report an easy-to-fabricate microcavity design to produce optically pumped high-$\beta$ quantum dot microlasers. Our cavity concept is based on a buried photonic-defect for tight lateral mode confinement in a quasi-planar microcavity…

We present high-performance megahertz micromechanical oscillators based on freestanding epitaxial AlGaAs distributed Bragg reflectors. Compared with dielectric reflectors, the low mechanical loss of the monocrystalline heterostructure gives…

We report on the design, realization and characterization of optically pumped micropillar lasers with low-absorbing Al$_{0.2}$Ga$_{0.8}$As/Al$_{0.9}$Ga$_{0.1}$As dielectric Bragg reflectors (DBRs) instead of commonly used GaAs/AlGaAs DBRs.…

We have fabricated pillar microcavity samples with Bragg mirrors consisting of alternate layers of GaAs and Aluminium Oxide. Compared to the more widely studied GaAs/AlAs micropillars these mirrors can achieve higher reflectivities with…

We report the elliptically, close to circularly polarized lasing at $\hbar\omega = 1.473$ and 1.522 eV from an AlAs/AlGaAs Bragg microcavity with 12 GaAs quantum wells in the active region and chiral-etched upper distributed Bragg refractor…

Technological advances in the fabrication of nanophotonic circuits have driven the scientific community to increasingly focus on the precise tailoring of their key optical properties, over a broadband spectral domain. In this context, the…

We report the fabrication of monolithically integrated 940 nm AlGaAs distributed Bragg reflectors (DBRs) on graded GaAsP/Si substrates. Low-density surface bumps and cross-hatch patterns were observed on the DBR surfaces. Cross-sectional…

We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid…

The combination of grating-based frequency-selective optical feedback mechanisms, such as distributed feedback (DFB) or distributed Bragg reflector (DBR) structures, with quantum dot (QD) gain materials is a main approach towards…

Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of…

We report a novel hemispherical micro-cavity that is comprised of a planar integrated semiconductor distributed Bragg reflector (DBR) mirror, and an external, concave micro-mirror having a radius of curvature $50\mathrm{\mu m}$. The…

In-situ measurement is a key feature to better understand and precisely control the growth of complex structures, such as vertical-cavity surface-emitting lasers. In this work, we are showing the precise measurement of optical indices of…

Semiconductor exciton-polaritons in planar microcavities form coherent two-dimensional condensates in non-equilibrium. However, coupling of multiple lower-dimensional polariton quantum systems, critically needed for polaritonic quantum…

We present high-reflectivity substrate-transferred single-crystal GaAs/AlGaAs interference coatings at a center wavelength of 4.54 um with record-low excess optical loss below 10 parts per million. These high-performance mirrors are…

High quality AlxGa1-xAs distributed Bragg reflectors (DBRs) were successfully monolithically grown on on-axis Si (100) substrates via a Ge layer formed by aspect ratio trapping (ART) technique. The GaAs/ART-Ge/Si-based DBRs have…

We demonstrate epitaxial lattice-matched Al$_{0.89}$Sc$_{0.11}$N/GaN ten and twenty period distributed Bragg reflectors (DBRs) grown on c-plane bulk n-type GaN substrates by plasma-enhanced molecular beam epitaxy (PA-MBE). Resulting from a…

The optical properties of bulk $\lambda/2$ GaN microcavities working in the strong light-matter coupling regime are investigated using angle-dependent reflectivity and photoluminescence at 5 K and 300 K. The structures have an…

Periodic structures resonantly coupled to excitonic media allow the existence of extra intragap modes ('Braggoritons'), due to the coupling between Bragg photon modes and 3D bulk excitons. This induces unique and unexplored dispersive…

We propose a novel mechanism for designing quantum hyperbolic metamaterials with use of semi-conductor Bragg mirrors containing periodically arrangedquantum wells. The hyperbolic dispersion of exciton-polariton modes is realized near the…

Distributed Bragg reflectors (DBRs) are one of the basic photonic structures used to define microcavities for fundamental light-matter coupling studies, as well as to optimize performance of optoelectronic and photonic devices, e.g., lasers…