相关论文: Metal-organic Pulsed Laser Deposition for Complex …

Heavy plastic shear deformation at relatively low homologous temperatures is called high-pressure torsion (HPT) deformation, which is one method of severe plastic deformation (SPD). The aim of the paper is to give an overview of a new…

Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…

Microfabrication using nano- to micron-sized building blocks holds great potential for applications in next-generation electronics, optoelectronics, and advanced materials. However, traditional methods like chemical vapor deposition and…

We present a pulsed laser deposition (PLD) system that can monitor growth by simultaneously using in situ optical spectroscopic ellipsometry (SE) and reflection high-energy electron diffraction (RHEED). The RHEED precisely monitors the…

Tungsten trioxide is a versatile material with widespread applications ranging from electrochromic and optoelectronic devices to water splitting and catalysis of chemical reactions. For technological applications, thin films of WO3 are…

LaAlO3-Ba0.5Sr0.5TiO3 (LAO-BST) thin films, with different LAO contents, were deposited on Pt/Ti/SiO2/Si and (100) LaAlO3 substrate, via a pulsed laser deposition (PLD). Phase composition and microstructure of the LAO-BST thin films were…

Near-field optical microscopy can be used as a viable route to understand the nanoscale material properties below the diffraction limit. On the other hand, atomically thin two-dimensional (2D) transition metal dichalcogenides (TMDs) are the…

The development of ferromagnet/heavy metal thin-film structures, such as CoFeB/Mo, with spin-orbit interaction requires advanced methods for their production and study. Polarized neutron reflectometry (PNR) provides unique insights into the…

We report that epitaxial Sr2IrO4 thin-films can be selectively grown using pulsed laser deposition (PLD). Due to the competition between the Ruddlesden-Popper phases of strontium iridates (Sr_{n+1}Ir_{n}O_{3n+1}), conventional PLD methods…

We report very large bandgap enhancement in SrTiO3 (STO) films (fabricated by pulsed laser deposition below 800 {\deg}C), which can be up to 20% greater than the bulk value, depending on the deposition temperature. The origin is…

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…

An experimental study was conducted on controlling the growth mode of La0.7Sr0.3MnO3 thin films on SrTiO3 substrates using pulsed laser deposition (PLD) by tuning growth temperature, pressure and laser fluence. Different thin film…

Precise tunability of electronic properties of 2D nanomaterials is a key goal of current research in this field of materials science. Chemical modification of layered transition metal dichalcogenides leads to the creation of…

Owing to the trade-off between the accuracy and efficiency, machine-learning-potentials (MLPs) have been widely applied in the battery materials science, enabling atomic-level dynamics description for various critical processes. However,…

We report a method to precisely control the atomic defects at grain boundaries (GBs) of monolayer MoS2 by vapor-liquid-solid (VLS) growth using sodium molybdate liquid alloys, which serve as growth catalysts to guide the formations of the…

There is a growing interest in obtaining high quality monolayer transition metal disulfides (TMDSs) for optoelectronic device applications. Surface chemical treatments using a range of chemicals on monolayer TMDSs have proven effective to…

We report bulk-quality n-type SrTiO3 (n-SrTiO3) thin films fabricated by pulsed laser deposition, with electron mobility as high as 6600 cm2 V-1 s-1 at 2 K and carrier density as low as 2.0 x 10^18cm-3 (~ 0.02 at. %), far exceeding previous…

Two-dimensional materials have attracted growing interest due to their unique electronic properties and potential applications in spintronics. Interfacing strongly spin-orbit-coupled chalcogenides with functional oxides such as perovskites…

Pulsed Laser Deposition (PLD) is widely used to grow epitaxial thin films of quantum materials such as complex oxides. Here, we use in-situ X-ray scattering to study homoepitaxy of SrTiO$_3$ by energetic (e-) and thermalized (th-) PLD. We…

The assembly of arbitrary 3D structures using nano- to micron-scale colloidal building blocks has broad applications in photonics, electronics, and biology. Combining optical tweezers (OT) with two-photon polymerization (TPP) enables 3D…