相关论文: Platinum Black for stray-light mitigation on high-…
Recently, we demonstrated controllable 3D self-folding by means of capillary forces of silicon-nitride micro-objects made of rigid plates connected to each other by flexible hinges [1]. In this paper, we introduce platinum electrodes…
We investigated the electrical conductivity of platinum nanowires with heights ranging from 2 nm to 200 nm, deposited by focused electron beam induced deposition (FEBID). Post-deposition processing was employed to enhance the electrical…
We investigate the fabrication of electrical contacts using ion- and electron-beam induced deposition of platinum at the sub-\mu m scale. Halos associated with the metal surface decoration are characterized electrically in the 0.05-2 \mu m…
Interfacing graphene with solid-state devices and maintaining it free of contamination is a crucial step towards a functioning device, be it a semiconductor structure or any other device for technological applications. We take advantage of…
Many applications require charge neutralisation of isolated test bodies and this has been successfully done using photoelectric emission from surfaces which are electrically benign(gold) or superconducting (niobium). Gold surfaces nominally…
We demonstrate electron cooling in silicon using platinum silicide as a superconductor contact to selectively remove the highest energy electrons. The superconducting critical temperature of bulk PtSi is reduced from around 1 K to 0.79 K…
Acquiring a portable high density charged particles trap might consist of an array of micro-Penning-Malmberg traps (microtraps) with substantially lower end barriers potential than conventional Penning-Malmberg traps [1]. We report on the…
In this paper, we report on the use of tantalum and iridium as adhesion layers for platinum electrodes used in high temperature SAW devices based on langasite substrates (LGS). Unlike iridium, tantalum exhibits a great adhesive strength,…
The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high…
Electrodeposition of tantalum coating was performed from an ionic liquid, BMP[Tf2N], in the presence of dissolved anhydrous TaF5 and LiF. Superficial X-ray photoelectron spectroscopy supplemented by an argon ion etching and depth profiling…
We report on a reflective wave-plate system utilizing phase-shifting mirrors (PSM) for a continuous variation of elliptical polarization without changing the beam position and direction. The scalability of multilayer optics to large…
Flexible electronics are attracting attention due to the increasing demand for lightweight, bendable devices that can conform to various surfaces, including human skin. Although indium tin oxide (ITO) is widely used for electrical…
The quasi-optical modulation of linear polarization at millimeter and sub-millimeter wavelengths can be achieved by using rotating half wave plates (HWPs) in front of polarization sensitive detectors. Large operational bandwidths are…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
We synthesized monodisperse cobalt-platinum nanoparticles Co(0.14-0.22)Pt(0.86-0.78) of 9 nm in diameter by colloidal chemistry methods and deposited them by the Langmuir-Blodgett technique as highly ordered monolayers onto substrates with…
Thin films prepared of semiconductor nanoparticles are promising for low-cost electronic applications such as transistors and solar cells. One hurdle for their breakthrough is their notoriously low conductivity. To address this, we…
We calculate repulsive Casimir forces between metallic and magnetic plates and quantitatively probe the magnetic plate's properties as tuning knobs for the repulsion. Namely, the plate's thickness and its low-frequency permittivity and…
We present total and specular reflectance measurements of various materials that are commonly (and uncommonly) used to provide baffling and/or to minimize the effect of stray light in optical systems. More specifically, we investigate the…
Dynamic polarization control of light is essential for numerous applications ranging from enhanced imaging to materials characterization and identification. We present a reconfigurable terahertz metasurface quarter-waveplate consisting of…
We have fabricated pairs of platinum electrodes with separation between 20 and 3.5 nm. Our technique combines electron beam lithography and chemical electrodeposition. We show that the measurement of the conductance between the two…