相关论文: Mechanisms of de-icing by surface Rayleigh and pla…
Electroluminescence emission controlled by means of surface acoustic waves (SAWs) in planar light-emitting diodes (pLEDs) is demonstrated. Interdigital transducers for SAW generation were integrated onto pLEDs fabricated following the…
Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device…
With the application of surface acoustic wave (SAW) of 39.5 MHz to a model polymer liquid film,polyisobutylene, deposited on the solid substrates, the liquid film is densified, proved by the decrease of film thickness and the increase of…
Wave erosion of ice cliffs is one of the main mechanisms for waterline ice melt for icebergs, glacier fronts, and ice-shelf fronts. Despite its importance, this process is fundamentally not well understood or extensively tested in…
Surface acoustic wave (SAW) devices based on thin films of ZnO are a well established technology. However, SAW devices on bulk ZnO crystals are not practical at room temperature due to the significant damping caused by finite electrical…
Coherent gigahertz-frequency surface acoustic waves (SAWs) traveling on the surface of a piezoelectric crystal can, via the magnetoelastic interaction, resonantly excite traveling spin waves in an adjacent thin-film ferromagnet. These…
Surface acoustic wave (SAW) devices form an important class of acoustofluidic devices, in which the acoustic waves are generated and propagate along the surface of a piezoelectric substrate. Despite their wide-spread use, only a few fully…
Experiments investigating the attenuation and dispersion of surface waves in a variety of ice covers are performed using a refrigerated wave flume. The ice conditions tested in the experiments cover naturally occurring combinations of…
The so-called Localized Waves (LW), and the "Frozen Waves" (FW), have arisen significant attention in the areas of Optics and Ultrasound, because of their surprising energy localization properties. The LWs resist the effects of diffraction…
We propose and analyze a solid-state platform based on surface acoustic waves (SAWs) for trapping, cooling and controlling (charged) particles, as well as the simulation of quantum many-body systems. We develop a general theoretical…
This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous…
Surface acoustic wave (SAW) based sensors for applications to gaseous environments have been widely investigated since the last 1970s. More recently, the SAW-based sensors focus has shifted towards liquid-phase sensing applications: the SAW…
Higher-order quasi-longitudinal (QL) Lamb waves have been reported for sensor application in liquid media at a higher thickness-to-wavelength (h/l) ratio than the fundamental symmetric modes, with the main advantage of having higher…
We present a theoretical study, supported by simulations and experiments, on the spreading of a silicone oil drop under MHz-frequency surface acoustic wave (SAW) excitation in the underlying solid substrate. Our time-dependent theoretical…
We investigate laser-induced acoustic wave propagation through smooth and roughened titanium-coated glass substrates. Acoustic waves are generated in a controlled manner via the laser spallation technique. Surface displacements are measured…
The interaction between surface waves and sea ice involves many complex physical phenomena such as viscous damping, wave diffraction, and nonlinear effects. The combination of these phenomena, together with considerable variability in ice…
Ultrasonic guided waves offer a convenient and practical approach to structural health monitoring and non-destructive evaluation, thanks to some distinct advantages. Guided waves, in particular Lamb waves, can be used to localise damage by…
We have presented a new and alternative algorithm for noise reduction using the methods of discrete wavelet transform and numerical differentiation of the data. In our method the threshold for reducing noise comes out automatically. The…
We investigate the propagation of surface acoustic waves (SAWs) in a layered half-space system comprising a continuous, sub-wavelength-thick layer weakly adhering to a substrate. Using finite element simulations, we demonstrate that this…
A new type of Interface Acoustic Waves (IAW) is presented, for single-crystal orthotropic twins bonded symmetrically along a plane containing only one common crystallographic axis. The effective boundary conditions show that the waves are…