相关论文: Targeting low micro-roughness for 3D printed alumi…
The Fabry-P\'erot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though…
This work studies the influence of microstructures and crystalline defects on the superconductivity of MgB2, with the objective to improve its flux pinning. A MgB2 sample pellet that was hot isostatic pressed (HIPed) was found to have…
The synthesis and structural analysis of Mo/B periodical multilayer X-ray mirrors (PMMs) for beyond extreme ultraviolet (BEUV) optics was performed. The PMMs were deposited by a combination of pulsed DC and radio frequency (RF) magnetron…
We present H, Ks and L filter polarimetric differential imaging (PDI) data for the transitional disk around HD100546 obtained in 2013, together with an improved re-reduction of previously published 2006 data. We reveal the disk in polarized…
We introduce a method to analyze and modify a shape to make it manufacturable for a given additive manufacturing (AM) process. Different AM technologies, process parameters or materials introduce geometric constraints on what is…
Additively manufactured (AM) aluminum alloys with high strength and thermal stability have broad applications in turbine engines, vacuum pumps, heat exchangers, and many other industrial systems. Employing precipitates with an L1$_2$…
Off-the-shelf fused filament fabrication 3D printers are widely accessible and convenient, yet they exhibit quality loss at high speeds due to dynamic mis-synchronization between printhead motion and material extrusion systems, notably…
Residual stress and plastic strain in additive manufactured materials can exhibit significant microscopic variation at the powder scale, profoundly influencing the overall properties of printed components. This variation depends on…
Background events in the DRIFT-IId dark matter detector, mimicking potential WIMP signals, are predominantly caused by alpha decays on the central cathode in which the alpha particle is completely or partially absorbed by the cathode…
Foam has been suggested to reduce laser imprint because of its low density. In this paper, the two-dimensional radiation hydrodynamic code FLASH is applied to investigate and characterize the strength of laser imprint through analyzing…
We present a high-yield method for fabricating concave micromirror templates in silica using feedback-controlled CO2 laser ablation with precise in situ positioning. Real-time monitoring of the white-light emission generated during ablation…
The debris disc around HD 172555 was recently imaged in near-infrared polarised scattered light by the Very Large Telescope's Spectro-Polarimetric High-contrast Exoplanet REsearch instrument. Here we present optical aperture polarisation…
We perform light-scattering numerical simulations for two dust populations: (i) consolidated porous particles computed with the discrete dipole approximation (ADDA) and (ii) highly porous aggregate models, including fractal and hierarchical…
Multiwavelength dust continuum and polarization observations arising from self-scattering have been used to investigate grain sizes in young disks. However, the polarization by self-scattering is low in face-on optically thick disks and…
Metal-halide perovskites (MHPs) have exciting optoelectronic properties and are under investigation for various applications, such as photovoltaics, light-emitting diodes, and lasers. An essential step towards exploiting the full potential…
Motorized rotation mounts and stages are versatile instruments that introduce computer control to optical systems, enabling automation and scanning actions. They can be used for intensity control and position adjustments, etc. However,…
We have used an inexpensive 3D printer mounting an inexpensive pre-irradiated silicon diode to measure the 2D dose distribution of a small (approximately 10mm FWHM) proton beam. z was measured with high resolution whereas x was changed on a…
While Masked Image Modeling (MIM) has revolutionized fields of computer vision, its adoption in 3D medical image computing has been limited by the use of random masking, which overlooks the density of anatomical objects. To address this…
Pore formation during Laser Powder Bed Fusion (LPBF) has long posed challenges in metal 3D printing, significantly affecting the mechanical properties of the final product. Porosity frequently occurs because of an unstable keyhole…
The Helium Ion Microscope (HIM) has the capability to image small features with a resolution down to 0.35 nm due to its highly focused gas field ionization source and its small beam-sample interaction volume. In this work, the focused…