相关论文: Fabrication of optically smooth Sn thin films
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…
Surface-patterned ZnO thin films were fabricated by direct imprinting on ZnO sol and subsequent annealing process. The polymer-based ZnO sols were deposited on various substrates for the nanoimprint lithography and converted to…
Tin Sulphide (SnS) thin films have been recognized as a potential candidate for solar cells. Many fabrication techniques have been used to grow SnS thin films. The band-gap, ${\rm E_g}$ of SnS films as reported in literature, were found to…
This paper discusses questions of synthesizing and pressing vanadium oxides to create film-forming materials that can be used in producing optical coatings. Based on the film-forming materials thus created, technological processes have been…
Thin films from the lanthanum vanadate nanoparticles were successfully grown by pulsed laser deposition method on glass and silicon substrates for the first time. Morphology and thickness of the films depend on a type of substrate and a…
This study presents a novel method for fabricating stoichiometric SnS thin films with large grain sizes via reactive sputtering using a metallic Sn target and sulfur plasma (S-plasma). Unlike conventional approaches that rely on toxic H2S…
The continuing development of evaporative lithography is important for many areas such as the creation of photonic crystals for optronics and microelectronics, the development of biosensors for medical applications and biotechnology, and…
High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature…
High-quality materials are critical for advances in plasmonics, especially as researchers now investigate quantum effects at the limit of single surface plasmons or exploit ultraviolet- or CMOS-compatible metals such as aluminum or copper.…
Field-induced self-organized patterning in ultrathin (< 100 nm) polymer films produces resolutions of the order of 10 {\mu}m or more because of the high energy penalty for the surface deformations on small scales. We propose here a very…
Simple vacuum evaporation technique for deposition of dyes on various solid surfaces has been developed. The method is compatible with conventional solvent-free nanofabrication processing enabling fabrication of nanoscale optoelectronic…
To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…
We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…
Vanadium dioxide, a well-known Mott insulator, is a highly studied electronic material with promising applications in information processing and storage. While fully crystalline layers exhibit exceptional properties, such as a sharp and…
A current approach to depositing highly plasmonic titanium nitride films using the magnetron sputtering technique assumes that the process is performed at temperatures high enough to ensure the atoms have sufficient diffusivities to form…
Antiferromagnets are promising materials for future opto-spintronic applications since they show spin dynamics in the THz range and no net magnetization. Recently, layered van der Waals (vdW) antiferromagnets have been reported, which…
Tin Selenide (SnSe) thin films were grown onto glass and alumina substrates by Chemical Vapor Deposition (CVD) method. The structural, micro-structural and morphological characterizations of the as grown thin films were investigated using…
Metal deposition with cryogenic cooling is widely utilized in the condensed matter community for producing ultra-thin epitaxial superconducting layers on semiconductors. However, a drawback arises when these films return to room…