相关论文: Static-Equilibrium Oriented Interaction Force Mode…
This paper addresses the design and application controller for a small-size unmanned aerial vehicle (UAV). In this work, the main objective is to study the modeling and attitude controller design for a small size helicopter. Based on a…
The previously introduced aerial manipulation systems suffer from either limited end-effector DOF or small payload capacity. In this dissertation, a quadrotor with a 2-DOF manipulator is investigated that has a unique topology to enable the…
This paper proposes an adaptive tracking strategy with mass-inertia estimation for aerial transportation problems of multi-rotor UAVs. The dynamic model of multi-rotor UAVs with disturbances is firstly developed with a linearly…
This paper investigates the position-tracking control problem for fixed-wing unmanned aerial vehicles (UAVs) equipped with a turbojet engine via an integrated flight and propulsion control scheme. To this end, a hierarchical control…
This work presents a geometric backstepping controller for a variable-tilt omnidirectional multirotor that explicitly accounts for both servo and rotor dynamics. Considering actuator dynamics is essential for more effective and reliable…
This paper addresses the design and application controller for a small-size unmanned aerial vehicle (UAV). In this work, the main objective is to study the modeling and attitude controller design for a small size helicopter. Based on a…
Hybrid unmanned aircraft can significantly increase the potential of micro air vehicles, because they combine hovering capability with a wing for fast and efficient forward flight. However, these vehicles are very difficult to control,…
Conventional multi-rotors are under-actuated systems, hindering them from independently controlling attitude from position. In this study, we present several distinct configurations that incorporate additional control inputs for…
To rationalize the relatively high investment that industrial automation systems entail, research in the field of intelligent machines should target high value functions such as fettling, die-finishing, deburring, and fixtureless…
Autonomous missions of small unmanned aerial vehicles (UAVs) are prone to collisions owing to environmental disturbances and localization errors. Consequently, a UAV that can endure collisions and perform recovery control in critical aerial…
This paper discusses the design and the performance achievable with active aerodynamic attitude control in very low Earth orbit, i.e. below 450 km in altitude. A novel real-time algorithm is proposed for selecting the angles of deflection…
Recently, needs for unmanned aerial vehicles (UAVs) that are attachable to the wall have been highlighted. As one of the ways to address the need, researches on various tilting multirotors that can increase maneuverability has been…
This paper proposes a unidirectionally connected fully actuated system (UC-FAS) approach for the sub-stabilization and tracking control of 6-DOF quadrotors, tackling limitations both in state-space and FAS framework to some extent. The…
Aerial manipulators (AM) exhibit particularly challenging, non-linear dynamics; the UAV and the manipulator it is carrying form a tightly coupled dynamic system, mutually impacting each other. The mathematical model describing these…
Recent quadrotors have transcended conventional designs, emphasizing more on foldable and reconfigurable bodies. The state of the art still focuses on the mechanical feasibility of such designs with limited discussions on the tracking…
This paper proposes a novel quaternion-based approach for tracking the translation (position and linear velocity) and rotation (attitude and angular velocity) trajectories of underactuated Unmanned Aerial Vehicles (UAVs). Quadrotor UAVs are…
Operating drones in urban environments often means they need to land on rooftops, which can have different geometries and surface irregularities. Accurately detecting roof inclination using conventional sensing methods, such as vision-based…
In this work, we present Tilt-Ropter, a novel hybrid aerial-terrestrial vehicle (HATV) that combines tilt rotors with passive wheels to achieve energy-efficient multi-mode locomotion. Unlike existing under-actuated HATVs, the fully actuated…
This paper presents a new flight control framework for tilt-rotor multirotor uncrewed aerial vehicles (MRUAVs). Tiltrotor designs offer full actuation but introduce complexity in control allocation due to actuator redundancy. We propose a…
Aerial manipulators are increasingly used in contact-based industrial applications, where tasks like drilling and pushing require platforms to exert significant forces in multiple directions. To enhance force generation capabilities,…