相关论文: Failure Mode Analysis in Microsecond UV Laser Anne…
Recent advances in high-throughput experimentation for combinatorial studies have accelerated the discovery and analysis of materials across a wide range of compositions and synthesis conditions. However, many of the more powerful…
We have developed and tested an antireflection (AR) coating method for silicon lenses at cryogenic temperatures and millimeter wavelengths. Our particular application is a measurement of the cosmic microwave background. The coating consists…
The ultra-wide bandgap, high breakdown electric field, and large-area affordable substrates make \b{eta}-Ga2O3 promising for applications of next-generation power electronics while its thermal conductivity is at least one order of magnitude…
Programmability in femtosecond-laser-written integrated circuits is commonly achieved with the implementation of thermal phase shifters. Recent work has shown how such phase shifters display significantly reduced power dissipation and…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
Selenium has resurged as a promising photovoltaic material in solar cell research due to its wide direct bandgap of 1.95 eV, making it a suitable candidate for a top cell in tandem photovoltaic devices. However, the optoelectronic quality…
The present work reports the study of the optimized processing conditions of Bi0.9La0.1Fe0.9Mn0.1O3 thin films, grown by RF sputtering on platinum metalized silicon substrates. The combination of deposition at relatively low substrate…
We investigate the possibility of bistable lasing in microcavity lasers as opposed to bulk lasers. To that end, the dynamic behavior of a microlaser featuring two coupled, interacting modes is analytically investigated within the framework…
Laser ultrasonic non-destructive testing is widely used for the inspection of mechanical structures. This method uses the propagation of ultrasonic guided waves (UGW) in the media. For this purpose, it has been demonstrated that the…
We experimentally characterize the positions of the diffraction maxima of a phase grating on a screen, for laser light at oblique incidence (so-called off-plane diffraction or conical diffraction). We discuss the general case of off-plane…
The technique of laser-assisted nanoimprinting lithography (LAN) has been proposed to utilize an excimer laser to irradiate through a quartz mold and melts a thin polymer film on the substrate for micro- to nano-scaled fabrications. In the…
Cuboid-shaped organic microcavities containing a pyrromethene laser dye and supported upon a photonic crystal have been investigated as an approach to reducing the lasing threshold of the cavities. Multiphoton lithography facilitated…
Ultrathin passive films effectively prevent the chemical attack of stainless steel grades in corrosive environments; their stability critically depends on the interplay between structure and chemistry of the constituents Fe-Cr-Mo. In…
Industrial use of ultrashort-pulse surface structuring would significantly increase by an effective utilization of the average laser powers available currently. However, the unexplained degradation of surfaces processed with numerous pulses…
We investigate the interference correction to the conductivity of a medium consisting of metallic grains connected by tunnel junctions. Tunneling conductance between the grains, $e^2g_{\rm T}/\pi\hbar$, is assumed to be large, $g_{\rm T}\gg…
Microwave energy can be advantageously used for materials processing as it provides high heating rates and homogeneous temperature field distribution. These features are partly due to the large microwave penetration depth into dielectric…
$\alpha$-Tantalum ($\alpha$-Ta) is an emerging material for superconducting qubit fabrication due to the low microwave loss of its stable native oxide. However, hydrogen absorption during fabrication, particularly when removing the native…
Metasurfaces have been proposed as a new paradigm to manipulate light and improve light-matter interactions. Conventional metasurfaces are restricted to the loss of materials, limiting their performance ceiling. Here, the loss of metallic…
Recently, flow-based methods have achieved promising success in video frame interpolation. However, electron microscopic (EM) images suffer from unstable image quality, low PSNR, and disorderly deformation. Existing flow-based interpolation…
Room-temperature 1535-nm-band photoluminescence in ~126 nm silica films (6 at. % doping), produced by spin-coating an Er2O3 and tetraethylorthosilicate sol-gel formulation on silicon substrates, was studied as a function of vacuum furnace…