相关论文: Recrystallization and Interdiffusion Processes in …

Germanium-Tin (GeSn) alloys have emerged as a promising material for future optoelectronics, energy harvesting and nanoelectronics owing to their direct bandgap and compatibility with existing Si-based electronics. Yet, their metastability…

GeSn alloys are promising candidates for complementary metal-oxide-semiconductor (CMOS)-compatible, tunable lasers. Relaxation of residual compressive strain in epitaxial GeSn has recently shown promise in improving the lasing performance.…

Controlling the growth kinetics from the vapor phase has been a powerful paradigm enabling a variety of metastable epitaxial semiconductors such as Sn-containing group IV semiconductors (Si)GeSn. In addition to its importance for emerging…

We report on the temperature stability of pseudomorphic GeSn films grown by molecular beam epitaxy on Ge(001) substrates. Both the growth temperature-dependence and the influence of post-growth annealing steps were investigated. In either…

Ge-Sn alloys with a sufficiently high concentration of Sn is a direct bandgap group IV material. Recently, ion implantation followed by pulsed laser melting has been shown to be a promising method to realize this material due to its high…

Ge1-xSnx and Si1-x-yGeySnx alloys are promising materials for future opto- and nanoelectronics applications. These alloys enable effective band-gap engineering, broad adjustability of their lattice parameter, exhibit much higher carrier…

UV laser annealing (UV-LA) enables surface-localized high-temperature thermal processing to form abrupt junctions in emerging monolithically stacked devices, where the applicable thermal budget is restricted. In this work, UV-LA is…

A mechanism of controlling the degree of strain relaxation in GeSn epilayers, grown by molecular beam epitaxy on Ge/Si(001) substrates, is reported in this work. It is demonstrated that by suitably controlling the thickness and the growth…

GeSn alloys are nowadays considered as the most promising materials to build Group IV laser sources on silicon (Si) in a full complementary metal oxide semiconductor-compatible approach. Recent GeSn laser developments rely on increasing the…

By independently engineering strain and composition, this work demonstrates and investigates direct band gap emission in the mid-infrared range from GeSn layers grown on silicon. We extend the room-temperature emission wavelength above ~4.0…

GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just…

Exploring new topological materials with large topological nontrivial bandgaps and simple composition is attractive for both theoretical investigation and experimental realization. Recently alpha tin ({\alpha}-Sn) has been predicted to be…

GeSn alloys are the most promising semiconductors for light emitters entirely based on group IV elements. Alloys containing more than 8 at.% Sn have fundamental direct band-gaps, similar to conventional III-V semiconductors and thus can be…

In presented work, a reactive high-power impulse magnetron sputtering (r-HiPIMS) was used for high-rate deposition ( 170 nm/min) of Cu2O films. Films were deposited on a standard soda-lime glass (SLG) substrate at a temperature of 190C.…

GeSn alloys offer a promising route towards a CMOS compatible light source and the realization of electronic-photonic integrated circuits. One tactic to improve the lasing performance of GeSn lasers is to use a high Sn content, which…

Stacking multiple SiSiGe channels in advanced logic devices faces severe thermal budget accumulation, which degrades interfaces via Ge-Si interdiffusion and strain relaxation.This strategy lowers the Ge diffusion coefficient to 5.6-7% of…

The thermal stability and structural evolution of a GaN high-electron-mobility transistor (HEMT) heterostructure grown on a Si (111) substrate were investigated using in situ high-temperature X-ray diffraction (HT-XRD), reciprocal space…

Strain engineering has been a ubiquitous paradigm to tailor the electronic band structure and harness the associated new or enhanced fundamental properties in semiconductors. In this regard, semiconductor membranes emerged as a versatile…

Ultrashort pulsed laser annealing is an efficient technique for crystallizing amorphous semiconductors with the possibility to obtain polycrystalline films at low temperatures, below the melting point, through non-thermal processes. Here, a…

Series of GaN/AlN superlattices (SLs) with various periods and the same thicknesses of GaN quantum wells and AlN barriers have been investigated. X-ray diffraction, photoluminescence (PL) and transmission electron microscopy (TEM)…