相关论文: A High Throughput Study of both Compositionally Gr…
Compositionally complex solid solutions provide a unique route for engineering high-performance electrocatalysts, where the polyelemental surface composition can be seamlessly tuned to optimize activity, selectivity, and stability. However,…
The objective of this work was to study the RF sputtering process parameters optimisation for deposition of Silicon Nitride thin films. The process parameters chosen to be varied were deposition power, deposition duration, flow rate of…
Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…
High-quality thin polycrystalline films of the heavy-fermion compound CeCu_6 were prepared by sputter deposition. The thicker of these films (with thickness up to around 200 nm) reproduce the properties of the bulk compound CeCu_6. As the…
We investigated structure and morphology of PTFE layers deposited by vacuum process in dependence on deposition parameters: deposition rate, deposition temperature, electron activation energy and activation current. Pentacene (PnC) layers…
Polymer light-emitting devices were fabricated utilizing plasma polymerized thin films as emissive layers. These conjugated polymer films were prepared by RF Plasma Enhanced Chemical Vapor Deposition (PECVD) using naphthalene as monomer.…
The thickness evolution of in-plane magnetization reversal in ultrathin films is studied with a theoretical model that takes account of surface roughness typical of epitaxial growth. Guided by N\'{e}el's model, step edge sites of…
The structural parameters of $\epsilon$-FeGe have been determined at ambient conditions using single crystal refinement. Powder diffraction have been carried out to determine structural properties and compressibility for pressures up to 30…
We investigate the amorphous structure, chemical bonding, and electrical properties of magnetron sputtered Fe1-xCx (0.21<x<0.72) thin films. X-ray, electron diffraction and transmission electron microscopy show that the Fe1-xCx films are…
For the past two decades piezo MEMS technology are emerging for its low power consumption of ultrasonic sensing and actuation devices for biomedical applications. Still researchers are facing challenges in miniaturization of piezo-MEMS…
Room-temperature magnetoelectric multiferroicity has been observed in c-axis oriented GaFeO$_3$ thin films (space group $Pna2_1$), grown on economic and technologically important (100)Si substrates by pulsed laser deposition technique.…
Magnetite thin fims have been grown epitaxially on ZnO and MgO substrates using molecular beam epitaxy. The film quality was found to be strongly dependent on the oxygen partial pressure during growth. Structural, electronic, and magnetic…
Epitaxial FeRh(100) films (CsCl structure, $\sim 10\ ML\ $ thick), prepared {\it in-situ} on a W(100) single crystal substrate, have been investigated via valence band and core level photoemission. The presence of the temperature-induced,…
Gradual modification of the magnetic properties in ferromagnetic films has recently been proposed as an effective method to channel and control spin waves for the development of new functionalities in magnonic devices. Here, we investigate…
FeSex (x = 0.80, 0.84, 0.88, 0.92) thin films were prepared on SrTiO3(001) (STO), (La,Sr)(Al,Ta)O3(001) (LSAT), and LaAlO3(001) (LAO) substrates by pulsed laser deposition method. All thin films show single-phase and c-axis oriented…
The correlation between magnetic and structural properties of Co_{2} FeAl (CFA) thin films of different thickness (10 nm<d< 100 nm) grown at room temperature on MgO-buffered Si/SiO2 substrates and annealed at 600\lyxmathsym{\textdegree}C…
We have fabricated Ce/Pd bilayers grown on the SiO$_2$ substrate by magnetron sputtering under ultrahigh vacuum. Usage of palladium layer on top of the Ce film appears to prevent effectively the sample oxidation. The thickness of the cerium…
We report the growth of undoped and Fe (2 and 5 at. percentage) doped molybdenum oxide thin films on c-plane of sapphire substrate using pulsed laser ablation. X-ray diffraction results show that the films are oriented in (100) direction…
Epitaxial strain plays an important role in determining physical properties of perovskite ferroelectric oxide thin films. However, it is very challenging to directly measure properties such as polarization in ultrathin strained films using…
The structural interface properties of layered Pt/Ti/SiO2/Si electrodes have been investigated using high-resolution specular and diffuse x-ray reflectivity under grazing angles. Currently this multilayer system represents a technological…