相关论文: Laser Exfoliation of Graphene from Graphite
We present a fabrication method producing large and flat graphene flakes that have a few layers down to a single layer based on substrate bonding of a thick sample of highly oriented pyrolytic graphite (HOPG), followed by its controlled…
Raman spectroscopy is one of the widely used methods in the analysis of various samples including carbon-based materials. This study aimed to identify the number of layers and defects in graphene using micro-Raman spectroscopy. More…
In this paper we show how single layer graphene can be utilized to study swift heavy ion (SHI) modifications on various substrates. The samples were prepared by mechanical exfoliation of bulk graphite onto SrTiO$_3$, NaCl and Si(111),…
The adoption of graphene in electronics, optoelectronics and photonics is hindered by the difficulty in obtaining high quality material on technologically-relevant substrates, over wafer-scale sizes and with metal contamination levels…
Graphene on a SiO$_2$/Si substrate was removed by ultraviolet pulsed laser irradiation. Threshold laser power density to remove graphene depended on the graphene thickness. The mechanism is discussed using kinetic energy of thermal…
We observe optical third harmonic generation from graphene and few-layer graphite flakes produced by exfoliation. The emission scales with the cube of the intensity of the incident near-infrared femtosecond pulses and has a wavelength that…
Graphene is expected to be rather insensitive to ionizing particle radiation. We demonstrate that single layers of exfoliated graphene sustain significant damage from irradiation with slow highly charged ions. We have investigated the ion…
We have investigated the effect of ambient gas pressure (Argon) used during thermal exfoliation of graphite oxide on the number of graphene sheets in the resulting graphene. The ambience gas Ar pressures used are 80, 25, 1 atmosphere and…
In this note, we report a Raman spectroscopy study of annealing-induced effects on graphene samples prepared by the microexfoliation method. It was shown that randomly located adhesive residues often contaminate nearby graphene sheets…
We demonstrate that it is possible to mechanically exfoliate graphene under ultra high vacuum conditions on the atomically well defined surface of single crystalline silicon. The flakes are several hundred nanometers in lateral size and…
We have developed a method for depositing graphene monolayers and bilayers with minimum lateral dimensions of 2-10 nm by the mechanical exfoliation of graphite onto the Si(100)-2x1:H surface. Room temperature, ultra-high vacuum (UHV)…
We present an experimental observation of non-linear up- and down-converted optical luminescence of graphene and thin graphite subject to picosecond infrared laser pulses. We show that the excitation yields to a high density electron-hole…
We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L…
We report on detailed microscopy studies of graphene and few-layer-graphene produced by mechanical exfoliation on various semi-conducting substrates. We demonstrate the possibility to prepare and analyze graphene on (001)-GaAs, manganese…
Graphene has been extensively studied for a variety of electronic and optoelectronic applications. The reported contact resistance between metal and graphene, or rather its specific contact resistance (R{_C}), ranges from a few tens of…
We have demonstrated a method to disperse and exfoliate graphite to give graphene suspended in water-surfactant solutions. Optical characterisation of these suspensions allowed the partial optimisation of the dispersion process.…
Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial…
A method to produce suspensions of graphene sheets by combining solution-based bromine intercalation and mild sonochemical exfoliation is presented. Ultrasonic treatment of graphite in water leads to the formation of suspensions of graphite…
Liquid-phase exfoliation is one of the most promising routes for large scale production of multilayer graphene dispersions. These dispersions, which may be used in coatings, composites or paints, are believed to contain disorder-free…
Surfactants are often used to stabilise two-dimensional (2D) materials in environmentally friendly solvents such as water. Aqueous-surfactant solutions prevent agglomeration of nanosheets through steric and electrostatic repulsion,…