相关论文: A New Meshless Fragile Points Method (FPM) With Mi…
We propose and analyze an adaptive finite element method for a phase-field model of dynamic brittle fracture. The model couples a second-order hyperbolic equation for elastodynamics with the Ambrosio-Tortorelli regularization of the…
Flexoelectricity, the coupling between strain gradients and electric polarization, poses significant computational challenges due to its governing fourth-order partial differential equations that require C1-continuous solutions. To address…
Deformable fractured porous media appear in many geoscience applications. While the extended finite element (XFEM) has been successfully developed within the computational mechanics community for accurate modeling of the deformation, its…
A micromechanically motivated phase-field damage model is proposed to investigate the fracture behaviour in crosslinked polyurethane adhesive. The crosslinked polyurethane adhesive typically show viscoelastic behaviour with geometric…
Failure in brittle materials under dynamic loading conditions is a result of the propagation and coalescence of microcracks. Simulating this mechanism at the continuum level is computationally expensive or, in some cases, intractable. The…
In this study, we address damage initiation and micro-crack formation in ductile failure of polycrystalline metals. We show how our recently published thermodynamic framework for ductile phase-field fracture of single crystals can be…
Two dimensional simulations of non-cohesive granular matter in a biaxial shear tester are discussed. The effect of particle elasticity on the mechanical behavior is investigated using two complementary distinct element methods (DEM): Soft…
In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive…
We propose an efficient algorithm for the evaluation of the potential and its gradient of gravitational/electrostatic $N$-body systems, which we call particle mesh multipole method (PMMM or PM$^3$). PMMM can be understood both as an…
In this paper, the Discontinuous Cell Method (DCM) is formulated with the objective of simulating cohesive fracture propagation and fragmentation in homogeneous solids without issues relevant to excessive mesh deformation typical of…
The focus of the article is on fracture criteria for dynamic crack propagation in elastic materials with microstructures. Steady-state propagation of a Mode III semi-infinite crack subject to loading applied on the crack surfaces is…
We calculate transversal flexoelectric coefficients along the principal directions for fifty select atomic monolayers using ab initio Density Functional Theory (DFT). Specifically, considering representative materials from each of Groups…
In this paper, we propose an efficient Monte Carlo implementation of non-linear FBSDEs as a system of interacting particles inspired by the ideas of branching diffusion method. It will be particularly useful to investigate large and complex…
Numerical modeling of slope failures seeks to predict two key phenomena: the initiation of failure and the post-failure runout. Currently, most modeling methods for slope failure analysis excel at one of these two but are deficient in the…
Self-sensing conductive composites can reveal deformation and damage through measurable changes in electrical resistance, which makes them attractive for embedded diagnostics and learning-enabled structural health monitoring. This paper…
The conventional model governing the spread of fractures in elastic material is formulated by coupling linear elasticity with deformation systems. The classical linear elastic fracture mechanics (LEFM) model is derived based on the…
Meshfree methods, including the reproducing kernel particle method (RKPM), have been widely used within the computational mechanics community to model physical phenomena in materials undergoing large deformations or extreme topology…
The present work deals with the numerical resolution of coupled 3D-2D problems arising from the simulation of fluid flow in fractured porous media modeled via the Discrete Fracture and Matrix (DFM) model. According to the DFM model,…
We propose an energy-stable parametric finite element method (ES-PFEM) for simulating solid-state dewetting of thin films in two dimensions via a sharp-interface model, which is governed by surface diffusion and contact line (point)…
The discrete fracture model (DFM) has been widely used in the simulation of fluid flow in fractured porous media. Traditional DFM uses the so-called hybrid-dimensional approach to treat fractures explicitly as low-dimensional entries (e.g.…