相关论文: Humidity effects on evolution of CsI thin Films: F…
Structural and optical studies have been performed on the thermally-evaporated "as-deposited" and "humid air aged" CsI thin films. The structural analysis for both "as-deposited" and "humid air aged" films shows a well-oriented peaks…
In the present work, cesium iodide (CsI) thin films of different thickness have been prepared by thermal evaporation technique. The crystallite size and grain size of these films are compared by using X-ray diffraction (XRD) profile…
The evolution in the surface morphology of epitaxial graphene films and 6H-SiC(0001) substrates is studied by electron channeling contrast imaging. Whereas film thickness is determined by growth temperature only, increasing growth times at…
In this article, fractal concepts were used to explore the thermally evaporated potassium bromide thin films of different thicknesses 200, 300, and 500 nm respectively; grown on aluminium substrates at room temperature. The self-affine or…
Ni thin films grown by thermal evaporation and sputtering under different deposition conditions are characterized for structural and morphological properties using X-ray diffraction (XRD) and atomic force microscopy (AFM) techniques. XRD…
The effects of substrate treatment, temperature and composition on the surface morphology of Ni-Cr thin films grown on MgO(001) are studied by scanning tunneling microscopy (STM) and atomic force microscopy (AFM). A combination of…
Specific heat of polycrystalline BaTiO3 thin films on the fused quartz substrate was measured by ac-hot probe method. Phase transition temperature, excess entropy and spontaneous polarization were determined as a function of film thickness…
The results of RHEED, FTIR and Raman spectroscopy study of silicon and germanium films with the thickness up to 200 nm grown from molecular beams on dielectric Si$_3$N$_4$/SiO$_2$/Si(001) substrates are presented. Noticeable changes of the…
Tetragonal Mn$_x$Ga$_{1-x}$ (x=0.70, 0.75) thin films grown on SrTiO$_3$ substrates at different temperatures and thicknesses exhibit perpendicular magnetic anisotropy with coercive fields between 1-2 T. Transmission electron microscopy…
Changes in the mechanical properties of granular materials, induced by variations in the intrinsic compressibility of the particles, are investigated by means of numerical simulations based on the combination of the Finite Element and…
Using two different experimental techniques, namely, chemical vapor deposition (CVD) and physical vapor deposition (PVD), we deposited a Lead sulphide (PbS) thin films with a very small lifetime. We investigated the morphology of the…
ScN material is an emerging semiconductor with an indirect bandgap. It has attracted attention for its thermoelectric properties, use as seed layers, and for alloys for piezoelectric application. ScN or other transition metal nitride…
The present work is essentially focused on the study of optical and structural properties of hydrogenated amorphous silicon thin films (a-Si:H) prepared by radio-frequency cathodic sputtering. We examine separately the influence of hydrogen…
Uniform and multi-dispersed grain packs have been frequently used to conceptually study flow in porous media. Numerical simulations were previously used to address the effect of particle shape on characteristics, such as pore space fractal…
Chromium thin films deposited on silicon substrates by DC magnetron sputtering were systematically investigated as a function of film thickness, using a DC power of 50 W and a post-deposition annealing temperature of 200 C. Two types of…
Hydrogenated amorphous silicon alloy films are generally deposited by radio frequency plasma enhanced chemical vapor deposition (RF PECVD) technique on various types of substrates. Generally it is assumed that film quality remains unchanged…
We have investigated the influence of water molecule absorption on photoemissive and structural properties of potassium bromide (KBr) thin film photocathode under humid air exposure at relative humidity (RH) 65%. It is evident from…
Co2MnSi (CMS) films of different thicknesses (20, 50 and 100 nm) were grown by radio frequency (RF) sputtering on a-plane sapphire substrates. Our X-rays diffraction study shows that, in all the samples, the cubic <110> CSM axis is normal…
In the present work performance of cesium iodide thin film photocathode is studied in detail. The optical absorbance of cesium iodide thin films have been analyzed in the spectral range of 190 nm to 900 nm. The optical band gap energy of…
Barrium fluoride (BaF2) thin films were prepared by electron beam evaporation technique at room temperature, on glass, Silicon and Aluminum substrates having thickness of 20 nm each. Its structural property and surface morphology were…