相关论文: Characterization techniques of Fe-doped CuO thin f…
Cu-doped NiO thin films were deposited on ITO substrates via spray pyrolysis at 450 {\deg}C for 1.5 minutes. XRD confirmed a cubic NiO structure, with Cu incorporation reducing crystallite size, increasing interplanar spacing, and expanding…
Spin coating technique was employed to fabricate CuO films at different spin speeds for different time duration, and they were annealed at different temperatures for different time durations in air. These thin films were characterized using…
Thin films of Zn2+ doped cupric oxide (CuO) were synthesized using spin coating technique starting from a solution with Cu and Zn. The speed of spin coating and time duration were varied to fabricate a film with required uniform thickness.…
This study focuses on enhancing the electrical and thermoelectric properties of tungsten trioxide (WO$_3$) thin films using the spray pyrolysis technique. Three samples, namely A$_1$, A$_2$, and A$_3$, were prepared by depositing the films…
Spin coating technique was used to synthesize pure ZnO and Cu doped ZnO films on amorphous and conducting glass substrates. The doped amount of Cu in ZnO was varied up to 5% in atomic percentage. Speed of spin coating system, coating time,…
Copper oxide (CuO) thin films have been deposited on glass substrates by a facile sol-gel dip-coating technique with varying withdrawal speeds from 0.73 to 4.17 mm/s. The variation of film thickness manifested by dip-coating withdrawal…
Thin films of uniformly distributed Fe2O3 nanoparticles have been prepared on single crystal silicon and glass substrates by a spray pyrolysis technique in a single step using a mixture of water and ferrocene dissolved in xylene. The size…
In this work the electronic properties of Fe doped CuO thin films are studied by using a standard density functional theory. This approach is based on the abinitio calculations under the Korringa Kohn Rostoker coherent potential…
Transparent pure and Cu-doped (2.5, 5 and 10 at. %) anatase TiO2 thin films were grown by pulsed laser deposition technique on LaAlO3 substrates. The samples were structurally characterized by X-ray absorption spectroscopy and X-ray…
In this paper Al doped ZnO (AZO) thin films with 0, 3, 6 and 12 at. % Al concentration were prepared by sol-gel method on glass substrates. The deposited films were annealed at different temperatures of 300, 350, 400, 450 and 500 {\deg}C…
Cr-doped ZnO films were fabricated by a new but feasible method, that is, annealing Cr-Zn layers deposited via DC magnetron sputtering in air. Microstructures of the films were investigated using X-ray diffraction, scanning electron…
In this work thin films of the La1-xSrxCoO3 (0.05 < x < 0.26) compound were grown, employing the so-called spray pyrolysis process. The as-grown thin films exhibit polycrystalline microstructure, with uniform grain size distribution, and…
Thin films of magnesium doped zinc oxide (MZO) were synthesized using the sol gel method and annealed at different temperatures under ambient condition. The morphological properties of the post annealed MZO films were investigated using X…
In this study, we have delineated the preparation and influence of Fe doping on microstructural and optical properties of the pristine and Fe incorporated TiO$_2$ thin film with different Fe concentrations (0, 2, 4, 6, and 8 at.% ). The…
We fabricated NiFe2O thin films on MgAl2O4 (001) substrates by reactive dc magnetron co-sputtering in a pure oxygen atmosphere at different substrate temperatures. The film properties were investigated by various techniques with a focus on…
We report the growth of undoped and Fe (2 and 5 at. percentage) doped molybdenum oxide thin films on c-plane of sapphire substrate using pulsed laser ablation. X-ray diffraction results show that the films are oriented in (100) direction…
Orientation, structure and morphology in the early growth stages of CuO films on strontium titanate were studied by synchrotron radiation X-ray diffraction. Nanostructured CuO films were obtained by ex situ heat treatment at 970 K in oxygen…
The structural, optical and electrical properties of spray deposited antimony (Sb) doped tin oxide (SnO2) thin films, prepared from SnCl4 precursor, have been studied as a function of antimony doping concentration. The doping concentration…
Sol-gel spin coating technique was employed to synthesize CuO thin films at 1500 rpm, 2200 rpm and 2400 rpm for 30 seconds, and subsequently annealed at 150-550{\deg}C for 1 hour. Multi-layered CuO thin films with 3 and 5 layers were…
Cu doped transparent ZnO thin films were spin coated on conductive glass substrates. The samples were subsequently annealed in air for 1 hour at 500 0C in order to form the phase of ZnO. ZnO samples were doped with different Cu molar…