相关论文: Growth, microstructure and thermal transformation …

Ni-Mn-Ga films in the austenite and the martensite structures at room temperature have been obtained using the DC magnetron sputtering technique. Two elaboration processes were studied. A first batch of samples was deposited using a resist…

Nb-doped SrTiO$_{3}$ epitaxial thin films have been prepared on (001) SrTiO$_{3}$ substrates using pulsed laser deposition. A high substrate temperature ($>1000^{\circ}{C}$) was found to be necessary to achieve 2-dimensional growth. Atomic…

Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…

Biaxially textured LuNi2BC thin films with Tc up to 15.8 K and a residual resistivity ratio up to 15 have been prepared. The films were deposited on MgO(110) substrates using pulsed laser deposition from a stoichiometric target. Via the…

High–quality epitaxial YNixMn1-xO3 thin films have been successfully grown on SrTiO3 (100) (STO) by pulsed laser deposition. X-ray diffraction studies showed that the films deposited on STO are fully c-axis oriented and exhibit…

We have grown epitaxial thin films of multiferroic BiMnO$_3$ using pulsed laser deposition. The films were grown on SrTiO$_3$ (001) substrates by ablating a Bi-rich target. Using x-ray diffraction we confirmed that the films were epitaxial…

In order to obtain Ni-Mn-Ga epitaxial films crystallized in martensite structures showing Magnetic-Induced Rearrangement (MIR) of martensite variants, a fine control of the composition is required. Here we present how the co-sputtering…

Shape memory alloys have a wide range of applications, including high stroke actuation, energy-efficient ferroic cooling, and energy harvesting. These applications are based on a reversible martensitic transformation, which results in a…

Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…

Epitaxial copper thin films were deposited by magnetron sputtering. The adatoms during deposition are influenced by deposition parameters which cause variations in thin film properties. XRD and FESEM studies were done to get an insight into…

We report a new in-situ reactive deposition thin film growth technique for the production of MgB2 thin films which offers several advantages over all existing methods and is the first deposition method to enable the production of…

The structural, magnetic, and magnetocaloric properties of epitaxial Ni-Co-Mn-Al thin films with different compositions have been studied. The films were deposited on MgO(001) substrates by co-sputtering on heated substrates. All films show…

Low-temperature epitaxial growth of refractory transition-metal nitride thin films by means of physical vapor deposition has been a recurring theme in advanced thin-film technology for several years. In the present study, 150-nm-thick…

(111) NiO epitaxial layers embedded with crystallographically oriented Ni-clusters are grown on c-GaN/Sapphire templates using pulsed laser deposition technique. Structural and magnetic properties of the films are examined by a variety of…

The article consists of four sections all dealing with the computational modeling of the sputtering process. The first section deals with the difference in Bismuth atomic layer deposition at different polar angle and ion flounce. In the…

Tuning functional properties of thin caloric films by mechanical stress is currently of high interest. In particular, a controllable magnetisation or transition temperature is desired for improved usability in magnetocaloric devices. Here,…

Ni thin films grown by thermal evaporation and sputtering under different deposition conditions are characterized for structural and morphological properties using X-ray diffraction (XRD) and atomic force microscopy (AFM) techniques. XRD…

We present electric and magnetic properties of 0.8Pb(Fe1/2Nb1/2)O3-0.2Pb(Mg1/2W1/2)O3 films epitaxially grown on (001) SrTiO3 substrates using pulsed laser deposition. A narrow deposition window around 710 oC and 0.2 mbar has been…

The role of stoichiometry and growth temperature in the preferential nucleation of material phases in the Li-Nb-O family are explored yielding an empirical growth phase diagram. It is shown that while single parameter variation often…

(111)NiO epitaxial films are grown on c-sapphire substrates at various growth temperatures ranging from room-temperature to 600C using pulsed laser deposition (PLD) technique. Two series of samples, where different laser fluences are used…