相关论文: 2.4GHZ Class AB power Amplifier For Healthcare App…

This research was to design a 2.4 GHz class E Power Amplifier (PA) for health care, with 0.18um Semiconductor Manufacturing International Corporation CMOS technology by using Cadence software. And also RF switch was designed at cadence…

In this paper, a two-stage ultra-low-power operational amplifier is designed, and a comparative analysis of the proposed subthreshold complementary amplifier is presented between 180nm, 90nm, and 45nm CMOS technology. The proposed…

Operational Amplifiers (Op-Amps) play a crucial role in the field of biomedical engineering, as they enable signal amplification and processing in various medical devices. With the increasing demand for portable and low-power biomedical…

We report on the design and characterization of a high-power amplifier with an output power of 36.5 dBm for a frequency range of 50 MHz to 1000 MHz with a total gain of 40 dB. The amplifier is optimized for driving acousto-optic and…

This paper presents a compact low-power, low-noise bioamplifier for multi-channel electrode arrays, aimed at recording action potentials. The design we put forth attains a notable decrease in both size and power consumption. This is…

In this work, the designs of a single-stage and 2-stage 2.4 GHz power amplifier (PA) are presented. The proposed PAs have been designed to provide high gain and improved efficiency using harmonic suppression and optimized impedance matching…

In this paper a CMOS two stage operational amplifier has been presented which operates at 1.8 V power supply at 0.18 micron (i.e., 180 nm) technology and whose input is depended on Bias Current. The op-amp provides a gain of 63dB and a…

The purpose of this project was to design and implement a pipeline Analog-to-Digital Converter using 0.35um CMOS technology. Initial requirements of a 25-MHz conversion rate and 8-bits of resolution where the only given ones. Although…

This paper describes a pipelined analog-to-digital converter (ADC) employing a power and area efficient architecture. The adjacent stages of a pipeline share operational amplifiers. In order to keep accuracy of the amplifiers in the first…

This paper presents the analysis, design, fabrication, and measurement of an integrated low-noise amplifier (LNA) implemented using a 130 nm CMOS technology, operating in the 2.4 GHz band. The LNA is a crucial component in the performance…

This paper describes a CMOS analogy voltage supper buffer designed to have extremely low static current Consumption as well as high current drive capability. A new technique is used to reduce the leakage power of class-AB CMOS buffer…

With the increase of the speed of computers, timing and power requirements are becoming crucial for memory devices. The main objective of the paper is to modify 180nm CMOS sense amplifier design by using memristive devices and improve the…

A novel topology for a high gain two-stage amplifier is proposed. The proposed circuit is designed in a way that the non-dominant pole is at output of the first stage. A positive capacitive feedback (PCF) around the second stage introduces…

Neuromorphic vision processor is an electronic implementation of vision algorithm processor on semiconductor. To image the world, a low-power CMOS image sensor array is required in the vision processor. The image sensor array is typically…

This paper describes the design of a differential class-E PA for Bluetooth applications in 0.18um CMOS technology with load mismatch protection and power control features. The breakdown induced by load mismatch can be avoided by attenuating…

The upgrade of the ATLAS Liquid Argon Calorimeter readout system calls for the development of radiation tolerant, high speed and low power serializer ASIC. We have designed a phase locked loop using a commercial 0.25 um Silicon-on-Sapphire…

Nanometer scale power amplifiers (PA) at sub-THz suffer from severe parasitic effects that lead to experience limited maximum frequency and reduced power performance at the device transceiver front end. The integrated circuits researchers…

Improving the power efficiency and spectral efficiency of communication systems has been one of the major research goals over the recent years. However, there is a tradeoff in achieving both goals at the same time. In this work, we consider…

We present characterization results and performance of a prototype Multiple-Amplifier Sensing (MAS) silicon charge-coupled device (CCD) sensor with 16 channels potentially suitable for faint object astronomical spectroscopy and low-signal,…

An instrumentation amplifier (InAmp) is an electronic device used in many applications, where test and measuring accuracy is required. However, one of the drawbacks of an InAmp is limited operation gain range. In this paper, we investigate…