相关论文: Analysis and Synthesis of a Subsystem of the Manua…
The EPICS based control system of the ISAC radioactive beam facility supervises several sub-systems, which are controlled by PLCs. Most of the devices are protected by non-trivial interlocks, which are implemented with ladder-logic…
In this paper, we present a user-friendly planetary rover's control system for low latency surface telerobotic. Thanks to the proposed system, an operator can comfortably give commands through the control base station to a rover using…
Industrial Control Systems (ICSs) are complex interconnected systems used to manage process control within industrial environments, such as chemical processing plants and water treatment facilities. As the modern industrial environment…
The rapid evolution of Cyber-Physical Systems (CPS) across various domains like mobility systems, networked control systems, sustainable manufacturing, smart power grids, and the Internet of Things necessitates innovative solutions that…
Considering the potential of thermostatically controlled loads (TCLs) to provide flexibility in demand response or load control, a semi-Markov model (SMM) for the ON/OFF controlled TCL is developed in this paper. This model makes full use…
Sequential Convex Programming (SCP) has recently gained significant popularity as an effective method for solving optimal control problems and has been successfully applied in several different domains. However, the theoretical analysis of…
Periodic control systems used in spacecrafts and automotives are usually period-driven and can be decomposed into different modes with each mode representing a system state observed from outside. Such systems may also involve intensive…
This paper discusses spacecraft control using variable-speed CMGs. A new operational concept for VSCMGs is proposed. This new concept makes it possible to approximate the complex nonlinear system by a linear time-varying system (LTV). As a…
Cyber-physical systems (CPS) are composed of various embedded subsystems and require specialized software, firmware, and hardware to coordinate with the rest of the system. These multiple levels of integration expose attack surfaces which…
Decentralized stochastic control problems involving general state/measurement/action spaces are intrinsically difficult to study because of the inapplicability of standard tools from centralized (single-agent) stochastic control. In this…
For mixed-initiative control between cyber-physical systems (CPS) and its users, it is still an open question how machines can safely hand over control to humans. In this work, we propose a concept to provide technological support that uses…
Programmable Logic Controllers (PLCs) are a core component of an Industrial Control System (ICS). However, if a PLC is compromised or the commands sent across a network from the PLCs are spoofed, consequences could be catastrophic. In this…
In this paper, we consider the problem of minimum-time optimal control for a dynamical system with initial state uncertainties and propose a sequential convex programming (SCP) solution framework. We seek to minimize the expected terminal…
Periodic control systems used in spacecrafts and automotives are usually period-driven and can be decomposed into different modes with each mode representing a system state observed from outside. Such systems may also involve intensive…
As autonomous systems are being developed in multiple industries it has been recognized that a phased approach is needed both for technical development and user acceptance. Partially in response, the automotive and aircraft industries have…
The Detector Control System (DCS) of the COMPASS experiment at CERN is presented. The experiment has a high level of complexity and flexibility and a long time of operation, that constitute a challenge for its full monitorisation and…
A quadcopter is an under-actuated system with only four control inputs for six degrees of freedom, and yet the human control of a quadcopter is simple enough to be learned with some practice. In this work, we consider the problem of human…
Industrial Control System (ICS) is a general term that includes supervisory control & data acquisition (SCADA) systems, distributed control systems (DCS), and other control system configurations such as programmable logic controllers (PLC).…
Efficient performance of a number of engineering systems is achieved through different modes of operation - yielding systems described as "hybrid", containing both real-valued and discrete decision variables. Prominent examples of such…
A key challenge for a common waveform for Integrated Sensing and Communications (ISAC) - widely seen as an attractive proposition to achieve high performance for both functionalities, while efficiently utilizing available resources -- lies…