相关论文: Broadband and omnidirectional anti-reflection laye…
Multijunction solar cells are usually grown on Ge substrates. This implies several disadvantages that hinder the performance of the whole multijunction and limit their possible applications. The drawbacks caused by the substrate are:…
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…
We demonstrate the Au-assisted growth of semiconductor nanowires on different engineered substrates. Two relevant cases are investigated: GaAs/AlGaAs heterostructures capped by a $50 {\rm nm}$-thick InAs layer grown by molecular beam…
In this paper, we have investigated the optical properties of GaAs nanocone (NC), inverted nanocone (INC), and hourglass (HG) shaped solar cells by performing Finite Difference Time Domain (FDTD) simulations. The different structures are…
We report thin-film InAs/GaAs quantum dot (QD) solar cells with $n-i-p{+}$ deep junction structure and planar back reflector fabricated by epitaxial lift-off (ELO) of full 3-inch wafers. External quantum efficiency measurements demonstrate…
Thin film solar cells have been attractive for decades in advanced green technology platforms due to its possibilities to be integrated with buildings and on-chip applications. However, the bottleneck issues involved to consider the current…
We propose a back-reflecting scheme in order to enhance the maximum achievable current in one micron thick crystalline silicon solar cells. We perform 3-dimensional numerical investigations of the scattering properties of metallic…
We propose a frequency selective light trapping scheme that enables the creation of more visually-transparent and yet simultaneously more efficient semitransparent solar cells. A nanoparticle scattering layer and photonic stack back…
Perovskite (CH3NH3PbI3) solar cells have made significant advances recently. In this paper, we propose a bilayer heterojunction solar cell comprised of a perovskite layer combining with a IV-VI group semiconductor layer, which can give a…
This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S2 (CIGS) thin film absorbers for high efficiency solar cells. Our findings demonstrate that the…
In-plane semiconductor nanowires with complex branched geometries, prepared via selective area growth (SAG), offer a versatile platform for advanced electronics, optoelectronics, and quantum devices. However, defects and disorder at the…
Broadband and omnidirectional antireflection coating is a generally effective way to improve solar cell efficiency, because the destructive interference between the reflected and input waves could maximize transmission light in the…
Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication…
We suggest a novel concept of efficient light-trapping structures for thin-film solar cells based on arrays of planar nanoantennas operating far from plasmonic resonances. The operation principle of our structures relies on the excitation…
The paper proposes a model of an organic solar cell based on Tamm plasmon polariton localized at the boundary of the active layer doped with plasmon nanoparticles and a multilayer mirror. It is shown that the integral absorption in the…
Light trapping in solar cells allows for increased current and voltage, as well as reduced materials cost. It is known that in geometrical optics, a maximum 4n^2 absorption enhancement factor can be achieved by randomly texturing the…
A high photon to electricity conversion efficiency of 47.2082% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a quadruple junction solar cell design. The electronic bandgap of…
We present a robust, precise, and accurate method to simultaneously measure the refractive indices of two transparent materials within an interference coating. This is achieved by measuring both a photometrically accurate transmittance…
Polymeric materials are prized for their formability, low density, and functional versatility. However, the refractive indices of common polymers fall in a relatively narrow range between 1.4 and 1.6. Here, we demonstrate that loading…
Micro-structured anti reflective coatings (ARC) have been identified as a promising solution to reduce optical losses in Concentrator Photovoltaics modules (CPV). We fabricated and tested in field a CPV modules made of 4 sub-modules with a…