相关论文: Temperature-dependent 2D-3D growth transition of u…
The stability of a metal thin films on a dielectric substrate is conditioned by the magnitude of the interactive forces at the interface. In the case of a non-reactive interface and weak adhesion, the minimization of free surface energy…
We study the effects of time-dependent substrate/film temperature in the deposition of a mesoscopically thick film using a statistical model that accounts for diffusion of adatoms without lateral neighbors whose coefficients depend on an…
The film thickness dependence of crystal growth is investigated for isotactic polystyrene (it-PS) in thin films, the thickness of which is from 20nm down to 4nm. The single crystals of it-PS grown at 180 in the ultrathin films show the…
An experimental study was conducted on controlling the growth mode of La0.7Sr0.3MnO3 thin films on SrTiO3 substrates using pulsed laser deposition (PLD) by tuning growth temperature, pressure and laser fluence. Different thin film…
The crystal growth of isotactic polystyrene (it-PS) is investigated in very thin, 11 nm thick films. The it-PS crystals grown in the thin films show quite different morphology from that in the bulk. With decreasing crystallization…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
Entropy stabilization has garnered significant attention as a new approach to designing novel materials. Much of the work in this area has focused on bulk ceramic processing, leaving entropy-stabilized thin films relatively underexplored.…
Pr$_{1-x}$Ca$_x$Ba$_2$Cu$_3$O$_{7-\delta}$($x\approx$0.5) thin films have been grown on SrTiO$_3$ and YSZ substrates by the pulsed laser ablation. The substrate temperature dependence of orientation and superconducting poperties were…
We study a thin film growth model with temperature activated diffusion of adsorbed particles, allowing for the formation of overhangs and pores, but without detachment of adatoms or clusters from the deposit. Simulations in one-dimensional…
In this paper, we report the growth of NaxCoO2 thin films by pulsed-laser deposition (PLD). It is shown that the concentration of sodium is very sensitive to the substrate temperature and the target-substrate distance due to the evaporation…
We study how the substrate temperature influences the structural properties of carbon films deposited by PVD (physical vapor deposition) techniques. We adapted a heating system inside the deposition chamber, with temperatures up to…
Nanostructured films obtained by the assembling of preformed atomic clusters are of strategic importance for a wide variety of applications. The deposition of clusters produced in the gas phase onto a substrate offers the possibility to…
Epitaxial titanium diboride thin films have been deposited on sapphire substrates by Pulsed Laser Ablation technique. Structural properties of the films have been studied during the growth by Reflection High Energy Electron Diffraction…
The effects of growth rate (G_r), deposition temperature (T_d), film thickness (t_F), and substrate induced strain (epsilon) on morphological, crystallographic and magnetic characteristics of equiatomic CoPt epitaxial films synthesized with…
In this paper the lubrication-type dynamical model is developed of a molten, pulsed laser-irradiated metallic film. The heat transfer problem that incorporates the absorbed heat from a single beam or interfering beams is solved…
In this work we investigate influence of substrate temperature on the surface morphology for substrate coverage below one monolayer. The model of film growth is based on random deposition enriched by limited surface diffusion. Also…
A mathematical model is developed to analyze the growth/decay rate of surface perturbations of an ultrathin metal film on an amorphous substrate (SiO_{2}). The formulation combines the approach of Mullins [J. Appl. Phys. v30, 77, 1959] for…
Pb(Zr0.52Ti0.48)O3 (PZT) thin films were in situ deposited by pulsed laser deposition (PLD) on Pt/Ti/SiO2/Si substrates using a template layer derived by sol-gel method. A 0.1-$\mu$m-thick PZT layer with (111) or (100)-preferred orientation…
The nucleation mechanisms during solution deposition of organic semiconductor thin films determine the grain morphology and may influence the crystalline packing in some cases. Here, in-situ optical spectromicroscopy in reflection mode is…
Modeling deformation at elevated temperatures using discrete dislocation dynamics (DDD) is a recent area of high interest. However, the literature dedicated to this subject fails to address the variations of DDD parameters with temperature.…