相关论文: Properties of CdTe layers deposited by a novel met…

Thin films of functional inorganic materials, particularly oxides, play a vital role in optoelectronics, enabling applications that range from active optical components to MEMS-based architectures. Achieving high aspect ratio patterning of…

A new method for continuous compositional-spread (CCS) thin-film fabrication based on pulsed-laser deposition (PLD) is introduced. This approach is based on a translation of the substrate heater and the synchronized firing of the excimer…

We report the growth of highly c-axis oriented topological insulator (TI) BiSbTe1.5Se1.5 (BSTS) thin films by pulsed laser deposition (PLD) technique. The various growth parameters such as substrate temperature, Argon pressure in the…

Pulsed laser deposition (PLD) is a versatile technique for growing epitaxial heterostructures of a wide variety of novel materials combinations. Achieving low-defect layers with atomically sharp interfaces by PLD requires careful management…

Graded composition CdxZn1-xTe films were prepared by growing several alternate layers of CdTe and ZnTe by the Isothermal Close Space Sublimation technique. The thickness of both kinds of layers was modified along the structure to produce an…

Using two different experimental techniques, namely, chemical vapor deposition (CVD) and physical vapor deposition (PVD), we deposited a Lead sulphide (PbS) thin films with a very small lifetime. We investigated the morphology of the…

We deposited Ag_2O films in PLD system on glass substrate for a fixed partial oxygen gas pressure (70 mili Torr) with the variation of laser energy from 75 to 215 mJ/Pulse. The XRD patterns confirm that the films have well crystallinity and…

CdTe has been a special semiconductor for constructing the lowest-cost solar cells and the CdTe-based Cd1-xZnxTe alloy has been the leading semiconductor for radiation detection applications. The performance currently achieved for the…

We report a novel method for depositing patterned dielectric layers with sub-micron features using atomic layer deposition (ALD). The patterned films are superior to sputtered or evaporated films in continuity, smoothness, conformality, and…

Vanadium dioxide, a well-known Mott insulator, is a highly studied electronic material with promising applications in information processing and storage. While fully crystalline layers exhibit exceptional properties, such as a sharp and…

Cd(Zn)O stands out as probably the best plasmonic material in the mid-IR, but it is usually grown on sapphire or other passive substrates. In this work we introduce SiC as a novel, highly polar, dopable substrate for Cd(Zn)O. The…

Thin films of CdTe were deposited on glass substrates by thermal evaporation. From the XRD measurements itis found that the films are of zinc-blende-type structure. Transmittance, absorption, extinction, and refractive coefficients are…

Pulsed-laser deposition (PLD) is one of the most promising techniques for the formation of complex-oxide heterostructures, superlattices, and well-controlled interfaces. The first part of this paper presents a review of several useful…

Thin aluminum oxide films were deposited by a new and simple physicochemical method called chemical liquid phase deposition (CLD) on semiconductor materials. Aluminum sulfate with crystallized water and sodium bicarbonate were used as…

Palladium diselenide (PdSe$_2$), a new type of two-dimensional noble metal dihalides (NMDCs), has received widespread attention for its excellent electrical and optoelectronic properties. Herein, high-quality continuous centimeter-scale…

An original modification of the standard Pulse Laser Deposition (PLD) method for preparing both undoped and indium doped zinc oxide (ZnO:In) thin films at low substrate temperature is proposed. This preparation method does not demand any…

A novel continuous-compositional spread technique based on the non-uniformity of the deposition rate typically observed in Pulsed Laser Deposition (PLD) is introduced. The approach uses the spatial variations in the deposition-rate…

Physical vapor high-temperature deposition of CdTe thin films is one of the main methods for preparing high-efficiency CdTe solar cells, but high-temperature deposition also has an impact on the internal structure of the film. The…

The development of ferromagnet/heavy metal thin-film structures, such as CoFeB/Mo, with spin-orbit interaction requires advanced methods for their production and study. Polarized neutron reflectometry (PNR) provides unique insights into the…

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…