相关论文: The Vibrations Of A Beam With A Local Unilateral E…

The mass reduction of satellite solar arrays results in significant panel flexibility, so possibly striking one another dynamically leading ultimately to structural damage. To prevent this, rubber snubbers are mounted at well chosen points…

Solar arrays are structures which are connected to satellites; during launch, they are in a folded position and submitted to high vibrations. In order to save mass, the flexibility of the panels is not negligible and they may strike each…

In order to save mass of satellite solar arrays, the flexibility of the panels becomes not negligible and they may strike each other; this may damage the structure. To prevent this, rubber snubbers are mounted at well chosen points of the…

We consider a mathematical model of an orbiting satellite, comprising a rigid carrier body and a flexible boom, operating under the influence of gravity gradient torque. This model is represented by a nonlinear control system, which…

We consider two cantilevered beams undergoing frictional impacts at the free end. The beams are designed to be of similar geometry so that they have distinct but close natural frequencies. Under harmonic base excitation near the primary…

The interaction between two parallel beams in one-dimensional discrete saturable systems has been investigated using lithium niobate nonlinear waveguide arrays. When the beams are separated by one channel and in-phase it is possible to…

A mathematical model of a simply supported Euler-Bernoulli beam with attached spring-mass system is considered. The model is controlled by distributed piezo actuators and lumped force. We address the issue of asymptotic behavior of…

This paper introduces a modeling framework that is suitable to resolve singularities of impact phenomena encountered in applications. The method involves an exact transformation that turns the continuum, often partial differential equation…

This paper addresses the challenges of the Euler-Bernoulli beam theory regarding shortening and stretching assumptions. Certain boundary conditions, such as a cantilever with a horizontal spring attached to its end, result in beams that…

We consider the dynamics of an elastic beam which is clamped at its left end to a vibrating support and which can move freely at its right end between two rigid obstacles (the stops). We model the contact with Signorini's complementary…

We consider non-stationary localized oscillations of an infinite Bernoulli-Euler beam. The beam lies on the Winkler foundation with a point inhomogeneity (a concentrated spring with negative time-varying stiffness). In such a system with…

A system consisting of a doubly clamped beam with an attached body (slider) free to move along the beam has been studied recently by multiple research groups. Under harmonic base excitation, the system has the capacity to passively adapt…

We present a combined analytical approach and numerical study on the stability of a ring bound to an annular elastic substrate, which contains a circular cavity. The system is loaded by depressurizing the inner cavity. The ring is modeled…

A thin flat rectangular plate supported on its edges and subjected to in-plane loading exhibits stable post-buckling behaviour. However, the introduction of a nonlinear (softening) elastic foundation may cause the response to become…

The paper deals with the interaction between buckling and resonance instabilities of mechanical systems. Taking into account the effect of geometric nonlinearity in the equations of motion through the geometric stiffness matrix, the problem…

A mechanical system consisting of an elastic beam under harmonic excitation and an attached sliding body is investigated. Recent experimental observations suggest that the system passively (self-)adapts the axial location of the slider to…

A collision of a rubber rod to a hard floor is regarded as a simple example of obstacle problems for elastic material. In this article we have proposed a new mathematical model for the collision phenomenon by applying beam equations with…

We develop a new asymptotic model of the dynamic interaction between an elastic structure and a system of gyroscopic spinners that make the overall multi-structure chiral. An important result is the derivation and analysis of effective…

The damping of built-up structures stems largely from the microscopic dry frictional interactions in the contact interfaces. The accurate prediction of friction damping has been an important scientific aim of the past several decades.…

Wave-like partial differential equations occur in many engineering applications. Here the engineering setup is embedded into the Hilbert space framework of functional analysis of modern mathematical physics. The notion wave-like is a…