相关论文: Ultra-Thin Silver Films obtained by Sequential Que…

Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 {\deg}C. The multilayers were then annealed inside a separate vacuum furnace at 950 {\deg}C for 3h. The…

Superconducting MgB2 thin films were prepared on Al2O3(0001) and MgO(100) substrates. Boron thin films were deposited by the electron-beam evaporation followed by post-annealing process with magnesium. Proper post annealing conditions were…

The growth of up to 10 monolayer-thick Fe films on a Au(001) surface was investigated during deposition at room temperature and during annealing using low-energy electron diffraction and x-ray photoemission spectroscopy as well as locally…

Sol-gel spin coating technique was employed to synthesize CuO thin films at 1500 rpm, 2200 rpm and 2400 rpm for 30 seconds, and subsequently annealed at 150-550{\deg}C for 1 hour. Multi-layered CuO thin films with 3 and 5 layers were…

We investigate ultrathin superconducting TiN films, which are very close to the localization threshold. Perpendicular magnetic field drives the films from the superconducting to an insulating state, with very high resistance. Further…

We demonstrate epitaxial growth of copper selenide (Cu$_{2-x}$Se) thin films in both cubic and rhombohedral phases, achieved via molecular beam epitaxy on Al$_2$O$_3$ (001) substrates. Remarkably, the high-temperature cubic phase -- which…

We grew thin films of a heavy fermion chiral magnet YbNi$_3$Al$_9$ by using molecular beam epitaxy. They were grown on $c$-plane sapphire substrates under ultra-high vacuum while maintaining a deposition rate at a stoichiometric ratio among…

Epitaxial growth of single crystalline noble metals on dielectric substrates has received tremendous attention recently due to their technological potentials as low loss plasmonic materials. Currently there are two different growth…

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. Remaining loss pathways originate in microscopic defects which manifest as two level systems (TLS) at low…

Real time electron microscopy observation on morphological changes in gold nano structures deposited on Si (100) surfaces as a function of annealing temperatures has been reported. Two types of interfaces with the substrate silicon were…

We report scanning tunneling microscopy investigation on epitaxial ultrathin films of pyrite-type copper disulfide. Layer by layer growth of CuS2 films with a preferential orientation of (111) on SrTiO3(001) and Bi2Sr2CaCu2O8+{\delta}…

Metal mixed polymers are a cheap and effective way to produce flexible metals and superconductors. As part of an on-going effort to learn how to tune the properties of these systems with ion implantation, we present a study of the…

By employing a mixed SnO$_2$+Sn source, we demonstrate suboxide molecular beam epitaxy growth of phase-pure single crystalline metastable SnO(001) thin films at a growth rate of ~1.0nm/min without the need for additional oxygen. These films…

Epitaxially grown full Heusler alloy of Rh2MnSb thin films were prepared for the first time using DC magnetron sputtering. The films were deposited on MgO [001] substrates with a deposition temperature of 600{\deg}C, 700{\deg}C, and…

As-grown superconducting MgB_2 thin films have been grown on SrTiO_3(001), MgO(001), and Al_2O_3(0001) substrates by a molecular beam epitaxy (MBE) method with novel co-evaporation conditions of low deposition rate in ultra-high vacuum. The…

We fabricated superconducting MgB2 thin films on (001) MgO substrates. The samples were prepared by magnetron rf and dc co-sputtering on heated substrates. They were annealed ex-situ for one hour at temperatures between 450{\deg}C and…

Quantum technologies require a new generation of superconducting electronic devices and circuitry. However, the superconducting materials used to construct them are restricted to a class of bulk superconductors. Gold films grown in contact…

Nb-doped SrTiO$_{3}$ epitaxial thin films have been prepared on (001) SrTiO$_{3}$ substrates using pulsed laser deposition. A high substrate temperature ($>1000^{\circ}{C}$) was found to be necessary to achieve 2-dimensional growth. Atomic…

Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…

We investigate the complex relationship between the growth conditions and the structural and transport properties of $\mathrm{Ti_xO_y}$ thin films grown by molecular beam epitaxy. Transport properties ranging from metallicity to…