相关论文: Saturation of Turbulent Drag Reduction in Dilute P…
Provided a sufficient concentration of long-chain polymers in a Newtonian solvent, turbulent wall-bounded flows exhibit a universal state known as Maximum Drag Reduction (MDR). Through direct numerical simulations, we show that the…
We address the mechanism of drag reduction by polymers in turbulent wall bounded flows. On the basis of the equations of fluid mechanics we present a quantitative derivation of the "maximum drag reduction (MDR) asymptote" which is the…
We present experimental and theoretical results addressing the Reynolds number (Re) dependence of drag reduction by sufficiently large concentrations of rod-like polymers in turbulent wall-bounded flows. It is shown that when Re is small…
Drag reduction by polymers in wall turbulence is bounded from above by a universal maximal drag reduction (MDR) velocity profile that is a log-law, estimated experimentally by Virk as $V^+(y^+)\approx 11.7 \log y^+ -17$. Here $V^+(y)$ and…
The flow of fluids in channels, pipes or ducts, as in any other wall-bounded flow (like water along the hulls of ships or air on airplanes) is hindered by a drag, which increases many-folds when the fluid flow turns from laminar to…
We employ the full FENE-P model of hydrodynamics of a dilute polymer solutions to derive a theoretical approach to drag reduction in wall bounded turbulence. We recapture the results of a recent simplified theory which derived the universal…
A simple model of the effect of polymer concentration on the amount of drag reduction in turbulence is presented, simulated and analyzed. The qualitative phase diagram of drag coefficient vs. Reynolds number (Re) is recaptured in this…
We present an experimental study on the drag reduction by polymers in Taylor-Couette turbulence at Reynolds numbers ($Re$) ranging from $4\times 10^3$ to $2.5\times 10^4$. In this $Re$ regime, the Taylor vortex is present and accounts for…
An addition of polymers can significantly reduce drag in wall-bounded turbulent flows, such as pipes or channels. This phenomenon is accompanied by a noticeable modification of the mean velocity profile. Starting from the premise that…
The drag of turbulent flows can be drastically decreased by addition of small amounts of high molecular weight polymers. While drag reduction initially increases with polymer concentration, it eventually saturates to what is known as the…
We investigate the phenomenon of drag reduction in a viscoelastic fluid model of dilute polymer solutions. By means of direct numerical simulations of the three-dimensional turbulent Kolmogorov flow we show that drag reduction takes place…
The current theories on the mechanism for polymer drag-reduction (DR) are generally applicable for long-chain flexible polymers that form viscoelastic solutions. Rigid polymer solutions that generate DR seemingly lack prevalent viscoelastic…
Drag reduction by polymers in turbulent flows raises an apparent contradiction: the stretching of the polymers must increase the viscosity, so why is the drag reduced? A recent theory proposed that drag reduction in agreement with…
Injection of dilute polymer in a turbulent flow suppresses frictional drag. This challenging and technologically important problem remains primarily unresolved due to the complex nature of the flow. An important factor in the drag reduction…
The phenomenon of drag reduction by polymer additives had been studied in simulations on the basis of non-Newtonian fluid mechanical models that take into account the field of polymer extension (conformation tensor) and its interaction with…
Drag reduction by polymers is bounded between two universal asymptotes, the von-K\'arm\'an log-law of the law and the Maximum Drag Reduction (MDR) asymptote. It is theoretically understood why the MDR asymptote is universal, independent of…
Turbulent channel flow of drag-reducing polymer solutions is simulated in minimal flow geometries. Even in the Newtonian limit, we find intervals of "hibernating" turbulence that display many features of the universal maximum drag reduction…
Polymer additives can substantially reduce the drag of turbulent flows and the upper limit, the so called "maximum drag reduction" (MDR) asymptote is universal, i.e. independent of the type of polymer and solvent used. Until recently, the…
The existence of drag reduction by polymer additives, well established for wall-bounded turbulent flows, is controversial in homogeneous, isotropic turbulence. To settle this controversy we carry out a high-resolution direct numerical…
Polymer-induced drag reduction is bounded by an asymptotic limit of maximum drag reduction (MDR). For decades, researchers have presumed that MDR reflects the convergence to an ultimate flow state that is not further changed by polymers.…