相关论文: Evolution of magnetic and microstructural properti…

Thin films of the charge-ordered (CO) compound Pr$_{0.5}$Ca$_{0.5}$MnO$_{3}$ have been deposited onto (100)-oriented SrTiO$_{3}$ substrates using the Pulsed Laser Deposition technique. Magnetization and transport properties are measured…

Copper ferrite thin films were rf sputtered at a power of 50W. The as deposited films were annealed in air at 800{\deg}C and slow cooled. The transmission electron microscope (TEM) studies were carried out on as deposited as well as on slow…

Nd2Fe14B magnetic nanoparticles have been successfully produced using a surfactant-assisted ball milling technique. The nanoparticles with different size about 6, 20 and 300 nm were obtained by a size-selection process. Spin-reorientation…

We developed a cryogenic temperature deposition process for high-performance CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) on 300 mm thermally oxidized silicon wafers. The effect of the deposition temperature of the CoFeB layers on the…

Thin films of Co2MnSi have been grown on a-plane sapphire substrates from three elemental targets by dc magnetron co-sputtering. These films are single phase, have a strong (110) texture and a saturation magnetization of 4.95 uB/formula…

a-Nb(x)Si(1-x) thin films with thicknesses down to 25 {\AA} have been structurally characterized by TEM (Transmission Electron Microscopy) measurements. As-deposited or annealed films are shown to be continuous and homogeneous in…

We report the deposition of thin Co$_2$FeSi films by RF magnetron sputtering. Epitaxial (100)-oriented and L2$_1$ ordered growth is observed for films grown on MgO(100) substrates. (110)-oriented films on Al$_2$O$_3$(110) show several…

The fabrication, characterisation, and superconductivity of MgB2 thick films grown on stainless steel substrate were studied. XRD, SEM, and magnetic measurements were carried out. It was found that the MgB2 thick films can be fast formed by…

Flexible NbC nanocomposite thin films with carbon content ranging from 0 to 99 at.% were deposited at room temperature on Si (100) and polystyrene substrates by non-reactive magnetron sputtering from pure Nb and C targets without applying…

Isotropic bonded magnets with a high loading fraction of 70 vol.% Nd-Fe-B are fabricated via an extrusion-based additive manufacturing, or 3D printing system that enables rapid production of large parts for the first time. The density of…

Superconducting MgB2 thin films were prepared on 50-micrometer-thick, flexible polyamide Kapton-E foils by vacuum co-deposition of Mg and B precursors with nominal thickness of about 100 nm and a special ex-situ rapid annealing process in…

High quality epitaxial thin films of Gd0.67Ca0.33MnO3 have been deposited onto (100) SrTiO3 substrates by pulsed-laser deposition. Enhanced properties in comparison with bulk samples were observed. The magnetic transition temperature (Tc)…

We investigate the exchange stiffness constants of 28-nm-thick CoFeB film using Brillouin light scattering. Series of CoFeB films are prepared on the MgO(001) substrate with or without additional 5-nm thick MgO buffer layer, the effect of…

The magnetization of thin films of cobalt ferrite frequently falls far below the bulk value of 455 kAm-1, which corresponds to an inverse cation distribution in the spinel structure with a significant orbital moment of about 0.6 muB that is…

We report the reduction in residual stress of AlN thin films and also the crystal structure, surface morphology and nanomechanical properties of magnetron sputtered as a function of substrate temperature (Ts, 35 - 600 ?C). The residual…

We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…

The crystallization process and the magnetization of Cr diluted CoFeB was investigated in both ribbon samples and thin film samples with Cr content up to 30 at. %. A primary crystallization of bcc phase from an amorphous precursor in ribbon…

This paper presents the effect of different cooling rate after annealing on structural and electrical properties of TiO2 thin films. Titanium dioxide thin film was deposited on a silicon substrate using DC magnetron technique. After…

The phase immiscibility and the excellent matching between Ag(001) and Fe(001) unit cells (mismatch 0.8 %) make Fe/Ag growth attractive in the field of low dimensionality magnetic systems. Intermixing could be drastically limited at…

Thin superconducting films of magnesium diboride (MgB2) with Tc \approx 24K were prepared on various oxide substrates by pulsed laser deposition (PLD) followed by an in-situ anneal. A systematic study of the influence of various in-situ…