相关论文: Dissipation in Nanocrystalline-Diamond Nanomechani…
We present measurements of the dissipation and frequency shift in nanomechanical gold resonators at temperatures down to 10 mK. The resonators were fabricated as doubly-clamped beams above a GaAs substrate and actuated magnetomotively.…
The energy dissipation 1/Q (where Q is the quality factor) and resonance frequency characteristics of single-crystal 3C-SiC ultrahigh frequency (UHF) nanomechanical resonators are measured, for a family of UHF resonators with resonance…
We report kelvin to millikelvin-temperature measurements of dissipation and frequency shift in megahertz-range resonators fabricated from ultra-nanocrystalline diamond. Frequency shift $\delta f/f_0$ and dissipation $Q^{-1}$ demonstrate…
We report on a systematic study of nanomechanical dissipation in high-frequency (approximatively 300 MHz) gallium arsenide optomechanical disk resonators, in conditions where clamping and fluidic losses are negligible. Phonon-phonon…
We report frequency and dissipation scaling laws for doubly-clamped diamond resonators. The device lengths range from 10 microns to 19 microns corresponding to frequency and quality-factor ranges of 17 MHz to 66 MHz and 600 to 2400…
We studied the frequency and quality factor of mechanical plasmonic nanoresonators as a function of temperature, ranging from ambient to 4 K. Our investigation focused on individual gold nanorods and nanodisks of various sizes. We observed…
We have studied damping in polycrystalline Al nanomechanical resonators by measuring the temperature dependence of their resonance frequency and quality factor over a temperature range of 0.1 - 4 K. Two regimes are clearly distinguished…
We report low-temperature measurements of dissipation in megahertz-range, suspended, single-crystal nanomechanical oscillators. At millikelvin temperatures, both dissipation (inverse quality factor) and shift in the resonance frequency…
Single-crystal diamond nanomechanical resonators are being developed for countless applications. A number of these applications require that the resonator be operated in a fluid, i.e., a gas or a liquid. Here, we investigate the fluid…
The temperature dependence of the magnetic resonance spectra of nitrogen-vacancy (NV-) ensembles in the range of 280-330 K was studied. Four samples prepared under different conditions were studied with NV- concentrations ranging from 10…
We report actuation and detection of gigahertz-range resonance frequencies in nano-crystalline diamond mechanical resonators. High order transverse vibration modes are measured in coupled-beam resonators exhibiting frequencies up to 1.441…
We analyze the dissipation of the frequency vibrations of nano-mechanical devices. We show that the coupling between flexural modes and two-level systems leads to sub-ohmic dissipation. The inverse quality factor of the low energy…
Nanomechanical resonators have demonstrated great potential for use as versatile tools in a number of emerging quantum technologies. For such applications, the performance of these systems is restricted by the decoherence of their fragile…
With its host of outstanding material properties, single-crystal diamond is an attractive material for nanomechanical systems. Here, the mechanical resonance characteristics of freestanding, single-crystal diamond nanobeams fabricated by an…
The applications of nanomechanical resonators range from biomolecule mass sensing to hybrid quantum interfaces. Their performance is often limited by internal material damping, which can be greatly reduced by using crystalline materials.…
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward…
High-\Qm{} mechanical resonators are crucial for applications where low noise and long coherence time are required, as mirror suspensions, quantum cavity optomechanical devices, or nanomechanical sensors. Tensile strain in the material…
In this work we present the fabrication and characterization of superconducting nano-mechanical resonators made from nanocrystalline boron doped diamond (BDD). The oscillators can be driven and read out in their superconducting state and…
The small mass and high coherence of nanomechanical resonators render them the ultimate force probe, with applications ranging from biosensing and magnetic resonance force microscopy, to quantum optomechanics. A notorious challenge in these…
Dielectric resonators are key components for many microwave and millimetre wave applications, including high-Q filters and frequency-determining elements for precision frequency synthesis. These often depend on the quality of the dielectric…