相关论文: FR3 for 6G Networks: A Comparative Study against F…

The ever-increasing demand for broadband and IoT wireless connectivity has recently urged the regulators around the world to start opening the 6 GHz spectrum for unlicensed use. These bands will, for example, permit the use of additional…

The growing demand for ubiquitous mobile data services along with the scarcity of spectrum in the sub-6 GHz bands has given rise to the recent interest in developing wireless systems that can exploit the large amount of spectrum available…

Networks exploiting distributed integrated sensing and communication (DISAC) nodes can provide enhanced localization and sensing performance, further emphasized when operating with large arrays and bandwidths available in the upper mid-band…

Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality,…

Cell-free massive MIMO (CF-mMIMO) has emerged as a promising technology for next generation wireless systems, combining the benefits of distributed antenna systems (DAS) and traditional MIMO technology. In this work, we present the first…

With the ratification of the IEEE 802.15.3d amendment to the 802.15.3, a first step has been made to standardize consumer wireless communications in the sub-THz frequency band. The IEEE 802.15.3d offers switched point-to-point connectivity…

As 6G research advances, the growing demand leads to the emergence of novel technologies such as integrated sensing and communication (ISAC), new antenna arrays like extremely large MIMO (XL-MIMO) and reconfigurable intelligent surfaces…

The use of Millimeter-wave (mmWave) spectrum in cellular communications has recently attracted growing interest to support the expected massive increase in traffic demands. However, the high path-loss at mmWave frequencies poses severe…

Communications at mmWave frequencies will be a key enabler of the next generation of cellular networks, due to the multi-Gbps rate that can be achieved. However, there are still several problems that must be solved before this technology…

One of the goals of 5G wireless systems stated by the NGMN alliance is to provide moderate rates (50+ Mbps) everywhere and with very high reliability. We term this service Ultra-Reliable Ubiquitous-Rate Communication (UR2C). This paper…

The millimeter wave spectra at 71-76GHz (70GHz) and 81-86GHz (80GHz) have the potential to endow fifth-generation new radio (5G-NR) with mobile connectivity at gigabit rates. However, a pressing issue is the presence of incumbent systems in…

The sixth-generation (6G) wireless systems are expected to adopt extremely large aperture arrays (ELAAs), novel antenna architectures, and operate in extremely high-frequency bands to meet growing data demands. ELAAs significantly increase…

The large bandwidths available at millimeter wave (mmWave) FR2 bands (24-71 GHz) and the emerging FR3 bands (7-24 GHz) are essential for supporting high data rates. Highly directional beams utilized to overcome the attenuation in these…

Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing…

Radio signals are used broadly as navigation aids, and current and future terrestrial wireless communication systems have properties that make their dual-use for this purpose attractive. Sub-6 GHz carrier frequencies enable widespread…

This paper presents a detailed measurement campaign and a comprehensive analysis of 15 GHz ultra-massive multiple-input multiple-output (UM-MIMO) channels tailored for the urban microcell (UMi) environment. Channel sounding is performed…

The upper mid-band FR3 spectrum (7-24 GHz) has garnered significant interest for future cellular services. However, utilizing a large portion of this band requires careful interference coordination with incumbent satellite systems. This…

Fifth-generation (5G) cellular systems are likely to operate in the centimeter-wave (3-30 GHz) and millimeter-wave (30-300 GHz) frequency bands, where a vast amount of underutilized bandwidth exists world-wide. To assist in the research and…

The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas.…

In the sixth-generation (6G), with the further expansion of array element number and frequency bands, the wireless communications are expected to operate in the near-field region. The near-field radio communications (NFRC) will become…