相关论文: FR3 for 6G Networks: A Comparative Study against F…

Frequency Range 3 (FR3) in the 7-24 GHz band will be the new spectrum for 6G wireless networks. The bandwidth availability and diversity of FR3 offer unprecedented opportunities for coherent multiband Integrated Sensing and Communications…

The upper-mid band (7-24 GHz), designated as Frequency Range 3 (FR3), has emerged as a definitive ``golden band" for 6G networks, strategically balancing the wide coverage of sub-6 GHz with the high capacity of mmWave. To compensate for the…

The growing demand for higher data rates and expanded bandwidth is driving the exploration of new frequency ranges, including the upper mid-band spectrum (6-24 GHz), which is a promising candidate for future Frequency Range 3 (FR3)…

6G radio access architecture is envisioned to contain a network of short-range in-X subnetworks with enhanced capabilities to provide efficient and reliable wireless connectivity. Short-range communications in industrial environments are…

Increasing attention is given to the upper mid-band or Frequency Range 3 (FR3), from 7 to 24 GHz, in the research towards sixth-generation (6G) networks. Promises of offering large data rates at favorable propagation conditions are leading…

Growing demand for high data rates is driving interest in the upper mid-band (FR 3) spectrum (6-24 GHz). While some propagation measurements exist in literature, the impact of vegetation on link performance remains under-explored. This…

The 4--8 GHz FR1(C) and 7--24 GHz upper mid-band FR3 spectrum are promising new 6G spectrum allocations being considered by the International Telecommunications Union (ITU) and major governments around the world. There is an urgent need to…

The 5G New Radio (NR) standard introduces new frequency bands allocated in Frequency Range 2 (FR2) to support enhanced Mobile Broadband (eMBB) in congested environments and enables new use cases such as Ultra-Reliable Low Latency…

Global allocations in the upper mid-band spectrum (4--24 GHz) necessitate a comprehensive exploration of the propagation behavior to meet the promise of coverage and capacity. This paper presents an extensive Urban Microcell (UMi) outdoor…

This study delves into the comprehensive characterization of large-scale channels at centimeter wave frequencies 7-15 GHz for urban macro/micro and suburban environments. Path-loss, large-scale fading, and angular channel statistics are…

Sixth-generation (6G) networks are envisioned to achieve full-band cognition by jointly utilizing spectrum resources from Frequency Range 1 (FR1) to Frequency Range 3 (FR3, 7-24 GHz). Realizing this vision faces two challenges. First,…

Fractional frequency reuse (FFR) is an inter-cell interference coordination scheme that is being actively researched for emerging wireless cellular networks. In this work, we consider hexagonal tessellation based planned FFR deployments,…

Frequency range 2 (FR2) has become an integral part of 5G networks to fulfill the ever-increasing demand for data hungry-applications. However, radio signals in FR2 experience high path and diffraction loss, which also pronounces the…

New spectrum allocations in the 4--8 GHz FR1(C) and 7--24 GHz FR3 mid-band frequency spectrum are being considered for 5G/6G cellular deployments. This paper presents results from the world's first comprehensive indoor hotspot (InH)…

Frequency Range 2 (FR2) has become an integral part of 5G networks to fulfill the ever increasing demand for user data throughput. However, radio signals in FR2 experience high path and diffraction loss in mobile environments. To address…

Future sixth-generation of wireless system is expected to provide data-rates in the order of 1 Tbps and latencies below 1 ms. Among others, one of the most promising strategies to meet these requirements is to operate at higher frequencies…

Cellular wireless systems are facing a proliferation of frequency bands over a wide spectrum, particularly with the expansion into FR3. These bands must be supported in user equipment (UE) handsets with multiple antennas in a constrained…

Reconfigurable intelligent surfaces (RISs) have emerged as one of the most studied topics in recent years, hailed as a transformative technology with the potential to revolutionize future wireless systems. While RISs are recognized for…

Frequency Range 3 (FR3), encompassing frequencies between 7.125 and 24.25 GHz, is an emerging frequency band for 6th generation (6G) applications. The upper mid-band, as it is frequently referred to, represents the sweet spot between…

This paper presents detailed radio propagation measurements for an indoor factory (InF) environment at 6.75 GHz and 16.95 GHz using a 1 GHz bandwidth channel sounder. Conducted at the NYU MakerSpace in the NYU Tandon School of Engineering…