相关论文: Development of Electroformed X-ray Optics Bridging…

SIMBOL-X is a hard X-ray mission, operating in the 0.5-70 keV range, which is proposed by a consortium of European laboratories for a launch around 2010. Relying on two spacecraft in a formation flying configuration, SIMBOL-X uses a 30 m…

X-ray nanotomography is a powerful tool for the characterization of nanoscale materials and structures, but is difficult to implement due to competing requirements on X-ray flux and spot size. Due to this constraint, state-of-the-art…

In the last years, optical readout of Micromegas gaseous detectors has been achieved by implementing a Micromegas detector on a glass anode coupled to a CMOS camera. Effective X-ray radiography was demonstrated using integrated imaging…

The MIT X-ray Polarimetry Beamline is a facility that we developed for testing components for possible use in X-ray polarimetry. Over the past few years, we have demonstrated that the X-ray source can generate nearly 100% polarized X-rays…

This paper summarizes the current status of the development of hard-X-ray optics using nickel replication at NASA's Marshall Space Flight Center.

We present a structured-illumination technique for full-field super-resolution transmission X-ray microscopy, which employs Fourier spectral decomposition inspired by established methods in visible-light microscopy. A 2D grating creating…

Future large space- or ground-based telescopes will offer the resolution and sensitivity to probe the habitable zone of a large sample of nearby stars for exo-Earth imaging. To this end, such facilities are expected to be equipped with a…

The surface figure of x-ray mirrors can be improved by differential deposition of thin films. To achieve the required corrections, WSi2 layers of variable thickness were deposited through beam-defining apertures of different openings. The…

Thin slumped glass foils are considered good candidates for the realization of future X-ray telescopes with large effective area and high spatial resolution. However, the hot slumping process affects the glass strength, and this can be an…

We describe a diffraction microscopy technique based on refractive optics to study structural variations in crystals. The X-ray beam diffracted by a crystal was magnified by beryllium parabolic refractive lenses on a 2D X-ray camera. The…

Compared with conventional grating-based spectrometers, reconstructive spectrometers based on spectrally engineered filtering have the advantage of miniaturization because of the less demand for dispersive optics and free propagation space.…

The past decades have witnessed the development of new X-ray beam sources with brightness growing at a rate surpassing Moore's law. Current and upcoming diffraction limited and fully coherent X-ray beam sources, including multi-bend…

We propose a nested Wolter-I mirror design for a neutron condenser, which is based on established X-ray telescope technology. We demonstrate through simulations that it can increase the flux density at the ESS imaging instrument ODIN by up…

Future Extremely Large Telescopes will adopt segmented primary mirrors with several hundreds of segments. Cophasing of the segments together is essential to reach high wavefront quality. The phasing sensor must be able to maintain very high…

X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded…

A new technical method is developed for soft x-ray spectroscopy of near-edge x-ray absorption fine structure (NEXAFS). The measurement is performed with continuously rotating linearly polarized light over 2$\pi$, generated by a segmented…

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and…

The direct detection and characterization of exoplanets will be a major scientific driver over the next decade, involving the development of very large telescopes and requires high-contrast imaging close to the optical axis. Some complex…

Full-field x-ray microscopy using x-ray objectives has become a mainstay of the biological and materials sciences. However, the inefficiency of existing objectives at x-ray energies above 15 keV has limited the technique to weakly absorbing…

For future space infrared astronomical coronagraphy, we perform experimental studies on the application of aluminum mirrors to a coronagraph. Cooled reflective optics is required for broad-band mid-infrared observations in space, while…