相关论文: QP-Based Control of an Underactuated Aerial Manipu…
This paper studies the kinematic tracking control problem for aerial manipulators. Existing kinematic tracking control methods, which typically employ proportional-derivative feedback or tracking-error-based feedback strategies, may fail to…
This paper presents a passive compliance control for aerial manipulators to achieve stable environmental interactions. The main challenge is the absence of actuation along body-planar directions of the aerial vehicle which might be required…
Successful aerial manipulation largely depends on how effectively a controller can tackle the coupling dynamic forces between the aerial vehicle and the manipulator. However, this control problem has remained largely unsolved as the…
Task-space quadratic programming (QP) is an elegant approach for controlling robots subject to constraints. Yet, in the case of kinematic-controlled (i.e., high-gains position or velocity) robots, closed-loop QP control scheme can be prone…
This paper presents a novel quadratic programming (QP) approach for constrained control allocation that directly incorporates continuous-time actuator rate constraints without requiring slack variables. Over-actuated aircraft…
We present experimental results using a passive whole-body control approach for quadruped robots that achieves dynamic locomotion while compliantly balancing the robot's trunk. We formulate the motion tracking as a Quadratic Program (QP)…
We propose a control protocol based on the prescribed performance control (PPC) methodology for a quadrotor unmanned aerial vehicle (UAV). Quadrotor systems belong to the class of underactuated systems for which the original PPC methodology…
This paper studies the control problem for safety-critical multi-agent systems based on quadratic programming (QP). Each controlled agent is modeled as a cascade connection of an integrator and an uncertain nonlinear actuation system. In…
Motion planning in high-dimensional space is a challenging task. In order to perform dexterous manipulation in an unstructured environment, a robot with many degrees of freedom is usually necessary, which also complicates its motion…
Many robotic systems are underactuated, meaning not all degrees of freedom can be directly controlled due to lack of actuators, input constraints, or state-dependent actuation. This property, compounded by modeling uncertainties and…
The paper presents a new, robust control algorithm for position trajectory tracking in a 3D space, dedicated to underactuated airships. In order to take into account real characteristics of such vehicles, and to reflect practically…
Aerial manipulator, which is composed of an UAV (Unmanned Aerial Vehicle) and a multi-link manipulator and can perform aerial manipulation, has shown great potential of applications. However, dynamic coupling between the UAV and the…
This article introduces a safe control strategy for application of forces to an external object using a dexterous robotic arm mounted on an unmanned Aerial Vehicle (UAV). A hybrid force-motion controller has been developed for this purpose.…
The paper develops a Model Predictive Controller for constrained control of spacecraft attitude with reaction wheel actuators. The controller exploits a special formulation of the cost with the reference governor like term, a low complexity…
In this paper, we investigate the operation of an aerial manipulator system, namely an Unmanned Aerial Vehicle (UAV) equipped with a controllable arm with two degrees of freedom to carry out actuation tasks on the fly. Our solution is based…
High-precision manipulation has always been a developmental goal for aerial manipulators. This paper investigates the kinematic coordinate control issue in aerial manipulators. We propose a predictive kinematic coordinate control method,…
Recent advancements in constrained kinematic control make it an attractive strategy for controlling robots with arbitrary geometry in challenging tasks. Most current works assume that the robot kinematic model is precise enough for the task…
The paper takes the first step towards the de- velopment of a control framework for underactuated flying humanoid robots. These robots may thus have the capacities of flight, contact locomotion, and manipulation, and benefit from…
This paper proposes an MPC-based controller to efficiently execute multiple hierarchical tasks for underactuated and constrained robotic systems. Existing task-space controllers or whole-body controllers solve instantaneous optimization…
This paper presents adaptive robust quadratic program (QP) based control using control Lyapunov and barrier functions for nonlinear systems subject to time-varying and state-dependent uncertainties. An adaptive estimation law is proposed to…