相关论文: Structural and Thermal Stability of B4C/Ru Multila…
Pd/Y multilayers are high reflectance mirrors designed to work in the 7.5-11 nm wavelength range. Samples, prepared by magnetron sputtering, are deposited with or without B4C barrier layers located at the interfaces of Pd and Y layers to…
The synthesis and structural analysis of Mo/B periodical multilayer X-ray mirrors (PMMs) for beyond extreme ultraviolet (BEUV) optics was performed. The PMMs were deposited by a combination of pulsed DC and radio frequency (RF) magnetron…
This study investigates the effects of incorporating 11B4C interlayers into Fe/Si multilayers, with a focus on interface quality, reflectivity, polarization, and magnetic properties for polarized neutron optics. It is found that the…
Ti/Cu multilayers with periods ranging from 4 to 52.5 nm were synthesized by magnetron sputtering to examine how the period thickness affects morphology, crystallization, texture development, and preservation of periodicity. The structural…
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr…
Uranium borides are promising candidate fuel forms for use in advanced nuclear reactors due to their high thermal conductivity and potential for dual use as both fuel and burnable absorber materials. In this work, uranium tetraboride…
We introduce a novel type of neutron interference mirrors based on a chemically homogeneous BxC (x>4) matrix with internal high precision 10B/11B isotope modulation. Simulations predict that these mirrors exhibit very high neutron…
Periodic multilayers are nowadays widely used to perform x-ray analysis in the soft x-ray range (photon energy lower than 1 keV). However, they do not permit to obtain high-resolution spectra like natural or synthetic crystals. Thus,…
Amorphous boron carbide (B4C) thin films are by far the most popular form for the neutron converting layers in the 10B-based neutron detectors, which are a rising trend in detector technologies in response to the increasing scarcity and…
This study investigates the effects of 11B4C co-sputtering on the structural and optical properties of Fe/Si stacked multilayers, with a focus on neutron supermirror applications. X-ray and neutron reflectivity techniques reveal that 11B4C…
The thermal stability of 200 nm thick plasma enhanced chemical vapor deposited a-C:H and a-C:D layers ranging from soft to hard layers has been studied and compared to that of deposits collected on the Tore Supra tokamak plasma facing…
This paper addresses the structural characterisation of a series of U/Fe, U/Co and U/Gd multilayers. X-ray reflectivity has been employed to investigate the layer thickness and roughness parameters along the growth direction and high-angle…
Reactive multilayer thin films, a class of energetic materials, are increasingly recognized for their potential in joining applications, utilizing the chemical energy released as heat during exothermic reactions. These materials hold also…
Etched multilayers obtained by forming a laminar grating pattern within interferential multilayer mirrors are used in the soft x-ray range to improve the spectral resolution of wavelength dispersive spectrometers equipped with periodic…
Developing scalable and environmentally benign anticorrosion coatings is critical for protecting steel infrastructure in chloride-rich environments. Here, a nacre-inspired multilayer epoxy coating reinforced with four MXene systems is…
Boron carbide thin films were synthesised by laser-assisted chemical vapour deposition (LCVD), using a CO2 laser beam and boron trichloride and methane as precursors. Boron and carbon contents were measured by electron probe microanalysis…
Using atomistic Monte Carlo simulations, we investigated the impact of the interface on the structural properties of iron and copper (Fe/Cu) magnetic multilayers grown by Vorono\"i diagram. Interest in magnetic multilayers has recently…
We use ab initio density functional calculations to study the formation and structural as well as thermal stability of cellular foam-like carbon nanostructures. These systems with a mixed $sp^2/sp^3$ bonding character may be viewed as…
This study presents a comprehensive investigation of chemical, structural, and magnetic properties of Ti/Ni multilayer systems with period thicknesses of 4 nm and 10 nm. Particular attention was paid to the characterization of the…
The presence of strong electron clouds in the quadrupole magnetic field regions of the Large Hadron Collider (LHC) leads to considerable heating that poses challenges for the cryogenic cooling system, and under certain conditions to proton…