相关论文: Surface Passivation for Halide Optoelectronics: Co…
We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show…
We use scanning probe microscopy to study ion migration in the formamidinium (FA)-containing halide perovskite semiconductor $Cs_{0.22}FA_{0.78}Pb(I_{0.85}Br_{0.15})_3$ in the presence and absence of chemical surface passivation. We measure…
We demonstrate the critical role of surface recombination in mixed-cation, mixed-halide perovskite, FA0.83Cs0.17Pb(I0.85Br0.15)3. By passivating non-radiative defects with the polymerizable Lewis base (3-aminopropyl)trimethoxysilane (APTMS)…
In this work, we study the kinetics of photoinduced halide migration in FA$_{0.8}$Cs$_{0.2}$Pb(I$_{0.8}$Br$_{0.2}$)$_3$ wide (~1.69 eV) bandgap perovskites and show halide migration slows down following surface passivation with…
Numerous efforts have been devoted to improve the electronic and optical properties of III-V compound materials via reduction of their nonradiative states, aiming at highly-efficient III-V sub-micrometer devices. Despite many advances,…
Metal halide perovskites (MHPs) have shown an incredible rise in efficiency, reaching as high as 25.7%, which now competes with traditional photovoltaic technologies. Herein, we excluded CsX and RbX, the most commonly used cations to…
Metal halide perovskite solar cells (MHPSCs) hold great promise related to their high efficiency and low fabrication costs, but their long-term stability under environmental conditions remains a major challenge. In this study, we…
We show that the use of 1,3-diaminopropane (DAP) as a chemical modifier at the perovskite/electron-transport layer (ETL) interface enhances the power conversion efficiency (PCE) of 1.7 eV bandgap FACs mixed-halide perovskite single-junction…
Surface effects can significantly impact the performance of nanophotonic and quantum photonic devices, especially as the device dimensions are reduced. In this work, we propose and investigate a novel approach to surface passivation to…
Aminosilanes are routinely employed for charge reversal or to create coupling layers on oxide surfaces. We present a chemical vapor deposition method to pattern mica surfaces with regions of high-quality aminosilane…
State-of-the-art metal halide perovskite-based photovoltaics often employ organic ammonium salts, AX, as a surface passivator, where A is a large organic cation and X is a halide. These surface treatments passivate the perovskite by forming…
In this work, we study the effect of various deposition methods for phosphonic acid interface modifiers commonly pursued as self-assembled monolayers in high-performance metal halide perovskite photovoltaics and light-emitting diodes. We…
Nitride perovskites are an emerging class of materials predicted to exhibit diverse functional properties, yet remain underexplored due to synthesis challenges of oxygen-free nitrides. Recently, LaMoN$_3$ has been reported as an oxygen-free…
Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection…
In this work we present some results of the treatment of polydimethylsiloxane (PDMS) surfaces using pulsed dielectric barrier discharge plasmas. The results of plasma treatment using different gases and mixtures, argon, argon plus water…
We compare three representative high performance PV materials: halide perovskite MAPbI3, CdTe, and GaAs, in terms of photoluminescence (PL) efficiency, PL lineshape, carrier diffusion, and surface recombination, over multiple orders of…
Intrinsic hydrogenated amorphous silicon films can provide outstanding surface passivation of crystalline silicon wafer surfaces. This quality of Intrinsic hydrogenated amorphous silicon makes it valuable in heterojunction with intrinsic…
Interfaces between the perovskite active layer and the charge-transport layers (CTLs) play a critical role in both efficiency and stability of halide-perovskite photovoltaics. One of the major concerns is that surface defects of perovskite…
Adding a large A-site cation, such as dimethylammonium (DMA), to the perovskite growth solution has been shown to improve performance and long-term operational stability of halide perovskite solar cells. To better understand the origins of…
Halide perovskites have recently gained widespread attention for their exceptional optoelectronic properties which have been illuminated by extensive spectroscopic investigations. In this article, nanophotonic surface-engineering using…