相关论文: Spherical Pendulum with Quad-Rotor Thrust Vectorin…
The concepts of stability and balance represent many critical problems faced by engineering today. The inverted pendulum on a cart is one such non-linear, unstable, multivariate system whose goal is to determine a suitable control action…
Conventional quadrotors received great attention in trajectory design and fault-tolerant control in these years. The direction of each thrust is perpendicular to the body because of the geometrics in mechanical design. Comparing with the…
Multi-degree-of-freedom (DOF) robotic manipulators exhibit strongly nonlinear, high-dimensional, and coupled dynamics, posing significant challenges for controller design. To address these issues, this work proposes a unified hybrid control…
Cable-Driven Parallel Robots (CDPRs) offer high payload capacities, large translational workspace and high dynamic performances. The rigid base frame of the CDPR is connected in parallel to the moving platform using cables. However, their…
Time-delayed control in a balancing problem may be a nonsmooth function for a variety of reasons. In this paper we study a simple model of the control of an inverted pendulum by either a connected movable cart or an applied torque for which…
A double pendulum subject to external torques is used as a model to study the stability of a planar manipulator with two links and two rotational driven joints. The hamiltonian equations of motion and the fixed points (stationary solutions)…
This paper articulates design and performance analysis of digital controllers in discrete and continuous time domains for a single-joint robot arm manipulator. The investigated robot arm system is modeled as a single degree of freedom (DOF)…
How to endow aerial robots with the ability to operate in close proximity remains an open problem. The core challenges lie in the propulsion system's dual-task requirement: generating manipulation forces while simultaneously counteracting…
Low-dimensional models are ubiquitous in the bipedal robotics literature. On the one hand is the community of researchers that bases feedback control design on pendulum models selected to capture the center of mass dynamics of the robot…
Complexity and nonlinear behaviours of inverted pendulum system make its control design a very challenging task. In this paper, a hybrid fuzzy adaptive control system using model reference approach is designed for inverted-pendulum system…
Although parallel manipulators (PMs) started with the introduction of architectures with 6 Degrees of Freedom (DoF), a vast number of applications require less than 6 DoF. Consequently, scholars have proposed architectures with 3 DoF and 4…
This study explores modeling and control for quadrotor acrobatics, focusing on executing flip maneuvers. Flips are an elegant way to deliver sensor probes into no-fly or hazardous zones, like volcanic vents. Successful flips require…
In this paper, we present a method to control a quadrotor with a neural network trained using reinforcement learning techniques. With reinforcement learning, a common network can be trained to directly map state to actuator command making…
In this paper, a new under-actuated Bi-Quadcopter Unmanned Aerial Vehicle is introduced. The proposed drone configuration can be controlled similar to a Bicopter. The dynamics of the proposed Bi-Quadcopter is developed using the…
This paper addresses the problem of thrust estimation and control for the rotors of small-sized multirotors Uncrewed Aerial Vehicles (UAVs). Accurate control of the thrust generated by each rotor during flight is one of the main challenges…
Quadrotors have demonstrated remarkable versatility, yet their full aerobatic potential remains largely untapped due to inherent underactuation and the complexity of aggressive maneuvers. Traditional approaches, separating trajectory…
This paper presents the design of a 6-DOF all-terrain micro aerial vehicle and two control strategies for multimodal flight, which are experimentally validated. The micro aerial vehicle is propelled by four motors and controlled by a single…
This paper focuses on the motion planning for mobile robots in 3D, which are modelled by 6-DOF rigid body systems with nonholonomic kinematics constraints. We not only specify the target position, but also bring in the requirement of the…
This study presents mechatronic design, dynamic modeling, simulations and real-time control experiments of a new movable scaffolding system. The proposed system consists of a 3 degrees-of-freedom movable platform, which can be positioned on…
Control theory deals with the study of controlling dynamical systems. Robots today are growing increasingly complex and moving out of factory floors to real world environment. These robots have to interact with real world environment…