相关论文: A Protection-Interoperable Fault Ride-Through Cont…

Due to the energy crisis and environmental pollution, the installed capacity of inverter-based resources (IBRs) in power grids is rapidly increasing, and grid-following control (GFL) is the most prevalent at present. Meanwhile, grid-forming…

Grid-forming (GFM) inverters can significantly alter the fault characteristics of power systems, which challenges the proper function of protective relays. This paper gives a holistic analysis of the interaction between GFM inverter-based…

Inverter-based resources (IBRs) are a key component in the ongoing modernization of power systems, with grid-forming (GFM) inverters playing a central role. Effective fault current limiting is a major challenge to modernizing power systems…

Grid-forming (GFM) inverters are expected in future inverter-dominated grids. In such grids, time-domain protection schemes, for example those based on instantaneous incremental quantities (IQs), are being advocated as potential solutions…

Recent research has shown that operating grid-connected converters using the grid-forming vector current control (GFVCC) scheme offers significant benefits, including the simplicity and modularity of the control architecture, as well as…

This paper presents a sub-switching period current-limiting control for a grid-tied inverter to prevent transient overcurrents during grid faults and enable seamless fault ride-through (FRT). Sudden grid-voltage disturbances, such as…

Integration of Inverter Based Resources (IBRs) which lack the intrinsic characteristics such as the inertial response of the traditional synchronous-generator (SG) based sources presents a new challenge in the form of analyzing the grid…

When grid-forming (GFM) inverter-based resources (IBRs) face severe grid disturbances (e.g., short-circuit faults), the current limitation mechanism may be triggered. Consequently, the GFM IBRs enter the current-saturation mode, inducing…

This paper investigates how grid-forming (GFM) and grid-following (GFL) control strategies in inverter-based resources (IBRs) influence line distance and differential protection in converter-dominated transmission systems. A modified IEEE…

A model predictive control (MPC) method for enhancing post-fault transient stability of a grid-forming (GFM) inverter based resources (IBRs) is developed in this paper. This proposed controller is activated as soon as the converter enters…

During grid faults, grid-forming converters are typically suggested to switch from a voltage-source to a current-source mode to limit the current and protect the electronics. This transition has the potential for the converter to…

This article introduces two control frameworks: one for Grid-Following (GFL) inverters aiding Grid-Forming (GFM) inverters in voltage regulation during large contingency events and optimizing power transactions under normal conditions; and…

The fault characteristics of inverter-based resources (IBRs) are different from conventional synchronous generators. The fault response of IBRs is non-linear due to saturation states and mainly determined by fault ride through (FRT)…

Grid-forming technology has a crucial role in achieving the future all renewable power grid. Among different types of grid-forming controllers, Virtual Oscillator (VO) based Controllers (VOCs) are the most advanced. VOCs outperform the…

Modern power systems increasingly demand converter-driven generation systems that integrate seamlessly with grid infrastructure. Grid-based converters are particularly advantageous, as they operate in harmony with conventional synchronous…

Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…

This paper demonstrates the key features of a control system applicable to inverter-based resources (IBR), which is based on grid-forming technology. Such resources are classified as grid-forming or grid-following converters based on the…

Inverter based renewable generation (RG), especially at the distribution level, is supposed to trip offline during an islanding situation. However, islanding detection is done by comparing the voltage and frequency measurements at the point…

This article proposes a "cross-forming" control concept for grid-forming inverters operating against grid faults. Cross-forming refers to voltage angle forming and current magnitude forming. It differs from classical grid-forming and…

Future power systems will include high shares of inverter-based generation. There is a general consensus that for allowing this transition, the Grid-Forming (GFM) control approach would be of great value. This article presents a GFM control…