相关论文: Ion beam treatment of thick polystyrene films
A polystyrene film spun onto polished silicon substrates was implanted with either nitrogen or argon ions using plasma immersion ion implantation (PIII) and subsequently investigated by X-ray and neutron reflectometry, UV-VIS and FTIR…
Ion beams are used routinely for processing of semiconductors, particularly sputtering, ion implantation and direct-write fabrication of nanostructures. However, the utility of ion beam techniques is limited by crystal damage and surface…
Enhanced diffusion of gold atoms into silicon substrate has been studied in Au thin films of various thicknesses (2.0, 5.3, 10.9 and 27.5 nm) deposited on Si(111) and followed by irradiation with 1.5 MeV Au2+ at a flux of 6.3x10^12 ions…
Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop…
A 30 nm Pt thin film evaporated onto a Si wafer was sputtered by 8 keV Ar$^{+}$ ions at various ion doses. The evolution of the modified sputtered films was monitored by atomic force microscopy (AFM), high resolution scanning electron…
Radiation damage induced by ion beams is traditionally treated at different levels of theoretical approaches, for the different scales and mechanisms involved.We present here details of a combined approach that, from a method at a…
The free surface of glassy polymers exhibits enhanced segmental dynamics compared to the bulk, forming a liquid-like layer that lowers the glass transition temperature (Tg) in nanometersized polymer samples. Recent studies have shown that…
We report on a novel method for tuning and enhancing fluorescence from irradiated polystyrene through electron-beam exposure in gaseous environments. We describe the effect of electron dose and ambient gas on the photoluminescence spectra…
Ionic liquids have generated interest in applications as lubricants and as additives to conventional lubricants due to their unique physical properties. In these applications, the liquid thin film can be subjected simultaneously to…
Modification induced by 110 MeV Ni ion irradiated thin film samples of C60 on Si and quartz substrates were studied at various fluences. The pristine and irradiated samples were investigated using Raman spectroscopy, electrical conductivity…
Ion-implantation of normally insulating polymers offers an alternative to depositing conjugated organics onto plastic films to make electronic circuits. We used a 50 keV nitrogen ion beam to mix a thin 10 nm Sn/Sb alloy film into the…
Electrokinetic phenomena at polymer-water interfaces are central to technologies for water purification, ion separations, and energy conversion, yet the ability to systematically control polymer surface charge and associated electrokinetic…
Intense, pulsed ion beams locally heat materials and deliver dense electronic excitations that can induce materials modifications and phase transitions. Materials properties can potentially be stabilized by rapid quenching. Pulsed ion beams…
Depth profiling of graphene with high-resolution ion beam analysis is a practical method for analysis of monolayer thicknesses of graphene. Not only is the energy resolution sufficient to resolve graphene from underlying SiC, but by use of…
Interactions of Poly (Ethylene Oxide) [PEO] and gamma irradiation of variable doses (1-30 kGy) on the thermal, crystalline and structural properties are investigated using DSC and FTIR technique. Two states of PEO, viz. powder (P-S-series)…
The structure and morphology of polymers are significantly altered upon exposure to high energy gamma irradiation. The present investigation reports the influence of such irradiation of doses in the range of 1 - 30 kGy on the particle size…
The focused helium ion beam microscope is a versatile imaging and nanofabrication instrument enabling direct-write lithography with sub-10-nm resolution. Subsurface damage and swelling of substrates due to helium ion implantation is…
We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional…
Focused ion beam milling allows manipulation of the shape and size of nanostructures to create geometries potentially useful for opto-electronics, thermoelectrics, and quantum computing. We focus on using the ion beam to control the…
The production of ion beams from the interaction of a circularly polarized laser pulse with a nanometric double-layer target is discussed in the regime where all electrons are expelled from the target by laser radiation pressure.…