相关论文: Multi-target Range, Doppler and Angle estimation i…
Multiple-input multiple-output (MIMO) radar has several advantages with respect to the traditional radar array systems in terms of performance and flexibility. However, in order to achieve high angular resolution, a MIMO radar requires a…
A new approach is proposed, namely CSSF MIMO radar, which applies the technique of step frequency (SF) to compressive sensing (CS) based multi-input multi-output (MIMO) radar. The proposed approach enables high resolution range, angle and…
The authors recently proposed a MIMO radar system that is implemented by a small wireless network. By applying compressive sensing (CS) at the receive nodes, the MIMO radar super-resolution can be achieved with far fewer observations than…
Recently, frequency-modulated continuous wave (FMCW) radars with array antennas are gaining in popularity on a wide variety of commercial applications. A usual approach of the range and angle estimation of a target with an array FMCW radar…
Ultra-massive multiple-input multiple-output MIMO (UM-MIMO) leverages large antenna arrays at high frequencies, transitioning communication paradigm into the radiative near-field (NF), where spherical wavefronts enable full-vector…
Modern radars employing wideband signals and extremely large (XL) multiple-input multiple-output (MIMO) arrays can significantly improve range and angular resolution. However, when large bandwidth and array aperture are used simultaneously,…
A MIMO radar system is proposed for obtaining angle and Doppler information on potential targets. Transmitters and receivers are nodes of a small scale wireless network and are assumed to be randomly scattered on a disk. The transmit nodes…
We investigate the problem of localizing multiple targets using a single set of measurements from a network of radar sensors. Such "single snapshot imaging" provides timely situational awareness, but can utilize neither platform motion, as…
We investigate the problem of sparse target detection from widely distributed multistatic \textit{Frequency Modulated Continuous Wave} (FMCW) radar systems (using chirp modulation). Unlike previous strategies (\emph{e.g.}, developed for…
This paper proposes compressed domain signal processing (CSP) multiple input multiple output (MIMO) radar, a MIMO radar approach that achieves substantial sample complexity reduction by exploiting the idea of CSP. CSP MIMO radar involves…
The FMCW radars are widely used for automotive radar systems. The basic idea for FMCW radars is to generate a linear frequency ramp as transmit signal. The difference frequency, (i.e., beat frequency) between the transmitted and received…
We present a low-complexity widely separated multiple-input-multiple-output (WS-MIMO) radar that samples the signals at each of its multiple receivers at reduced rates. We process the low-rate samples of all transmit-receive chains at each…
We consider multiple-input multiple-output (MIMO) radar systems with widely-spaced antennas. Such antenna configuration facilitates capturing the inherent diversity gain due to independent signal dispersion by the target scatterers. We…
Motivated by future automotive applications, we study the joint target detection and parameter estimation problem using orthogonal time frequency space (OTFS), a digital modulation format robust to time-frequency selective channels.…
Frequency modulated continuous wave (FMCW) radar is widely used in autonomous driving and industrial inspection due to its high-resolution target location and velocity estimation capability. However, the plethora of connected devices in…
Multiple-input multiple-output (MIMO) radar systems have been shown to achieve superior resolution as compared to traditional radar systems with the same number of transmit and receive antennas. This paper considers a distributed MIMO radar…
We study compressive sensing in the spatial domain to achieve target localization, specifically direction of arrival (DOA), using multiple-input multiple-output (MIMO) radar. A sparse localization framework is proposed for a MIMO array in…
Automotive mmWave radar has been widely used in the automotive industry due to its small size, low cost, and complementary advantages to optical sensors (e.g., cameras, LiDAR, etc.) in adverse weathers, e.g., fog, raining, and snowing. On…
Phase-modulated continuous-wave (PMCW) multiple-input multiple-output (MIMO) radar systems are known to possess excellent mutual interference mitigation capabilities, but require costly and power-hungry high sampling rate and high-precision…
We present a compressive radar design that combines multitone linear frequency modulated (LFM) waveforms in the transmitter with a classical stretch processor and sub-Nyquist sampling in the receiver. The proposed compressive illumination…