相关论文: Sensitivity analysis with a 3D mixed-dimensional c…
In this work we present a mixed-dimensional mathematical model to obtain the electric potential and current density in direct current simulations when a thin liner is included in the modelled domain. The liner is used in landfill management…
High-entropy MBenes (HE-MBenes) represent a promising, unexplored class of 2D materials for electrocatalysis. In this work, we present a systematic computational screening of 56 equiatomic quinary HE-MBene compositions from the {Ti, V, Cr,…
The purpose of this project is to investigate the use of charge couple devices (CCDs) to detect electrons directly. This can be done in transmission electron microscopy (TEM) for electrons over 100 KeV, but for space plasma instruments,…
A major practical barrier for implementing carbon-based electrode arrays with high device-packing density is to ensure large, predictable, and homogeneous sensitivities across the array. Overcoming this barrier depends on quantitative…
Extreme ultraviolet (EUV) scatterometry is an increasingly important metrology that can measure critical parameters of periodic nanostructured materials in a fast, accurate, and repeatable manner and with high sensitivity to nanoscale…
Adequate characterization of two-dimensional materials with low energy barriers for impurity adsorption is key for advancing applications based on catalysis, sensing, and surface functionalization. However, first-principles methods, such as…
The detection and characterization of illegal solid waste disposal sites are essential for environmental protection, particularly for mitigating pollution and health hazards. Improperly managed landfills contaminate soil and groundwater via…
Nuclear material deposited in equipment, transfer lines, and ventilation systems of a processing facility is usually referred to as holdup. In this work, we propose to use an array of detectors co-axial to the inspected pipe to measure the…
This paper presents a first study of the performance of a novel 2D position-sensitive microstrip detector, where the resistive charge division method was implemented by replacing the metallic electrodes with resistive electrodes made of…
A key part of planning CO2 storage sites is to devise a monitoring strategy. The aim of this strategy is to fulfill the requirements of legislations and lower cost of the operation by avoiding operational problems. If CCS is going to be a…
High-fidelity electron microscopy simulations required for quantitative crystal structure refinements face a fundamental challenge: while physical interactions are well-described theoretically, real-world experimental effects are…
The present article proposes a data analysis method for experimentally-derived measurements, which consists of an auto-optimization procedure and a sensitivity analysis. The method was applied to the results of a total-reflection…
Recent advances in microphysiological systems have underscored the need for novel sensing and monitoring systems specifically designed for three-dimensional (3D) cell culture. In this article, an original architecture of a cell-culture…
Illegal landfills are a critical issue due to their environmental, economic, and public health impacts. This study leverages aerial imagery for environmental crime monitoring. While advances in artificial intelligence and computer vision…
Time-lapse electrical resistivity tomography (ERT) is a popular geophysical method to estimate three-dimensional (3D) permeability fields from electrical potential difference measurements. Traditional inversion and data assimilation methods…
The spatial sensor characteristics of a 6cm TDR flat band cable sensor section was simulated with finite element modelling (High Frequency Structure Simulator-HFSS) under certain conditions: (i) in direct contact to the surrounding material…
The development of new manufacturing techniques such as 3D printing have enabled the creation of previously infeasible chemical reactor designs. Systematically optimizing the highly parameterized geometries involved in these new classes of…
This work presents a novel surface decomposition method for the sensitivity analysis of first-passage dynamic reliability of linear systems subjected to Gaussian random excitations. The method decomposes the sensitivity of first-passage…
Cosmic voids offer a unique opportunity to explore modified gravity (MG) models. Their low-density nature and vast extent make them especially sensitive to cosmological scenarios of the class $f(R)$, which incorporate screening mechanisms…
An effective biosensor based on two-dimensional (2D) Co-ZIF-L nanosheets for sensitive electrochemical non-enzymatic glucose detection is developed, which exhibits high electrocalalytic activities towards glucose due to the ordered porous…