相关论文: In-situ characterization of optical micro/nano fib…
We experimentally demonstrate the fabrication of optical micro/nanofibers (MNFs) using chemical etching and gas-flame techniques. In the chemical etching technique, a two-step process involves 40% and 24% of hydrofluoric acid solutions for…
Single-mode optical nanofibres are a central component of a broad range of applications and emerging technologies. Their fabrication has been extensively studied over the past decade, but imaging of the final sub-micrometre products has…
We demonstrate the fabrication of an optical nanofiber tip (ONFT) using a two-step chemical etching technique. This technique employs 30% and 24% hydrofluoric (HF) acid for the first and second steps, respectively. In the first step, a…
Optical nanofibers (ONF) of subwavelength dimensions confine light in modes with a strong evanescent field that can trap, probe, and manipulate nearby quantum systems. To measure the evanescent field and propagating modes, and to optimize…
A simple self-referenced non destructive method is proposed for measuring the cutoff wavelength of microstructured optical fibers (MOFs). It is based on the analysis of the time dependent optical power transmitted through a bow-tie slit…
Microstructured optical fibers (MOFs) are one of the most exciting recent developments in fiber optics. A MOF usually consists of a hexagonal arrangement of air holes running down the length of a silica fiber surrounding a central core of…
Multimode fibers (MMF) are an example of a highly scattering medium which scramble the coherent light propagating within them and produce seemingly random patterns. Thus, for applications such as imaging and image projection through a MMF,…
The ability to form images through hair-thin optical fibres promises to open up new applications from biomedical imaging to industrial inspection. Unfortunately, deployment has been limited because small changes in mechanical deformation…
The increased availability and brilliance of new X-ray facilities have in the recent years opened up the possibility to characterize the motion of dispersed nanoparticles in various microfluidic applications. One of these applications is…
Elemental mapping images can be achieved through step scanning imaging using pinhole optics or micro pore optics (MPO), or alternatively by full-field X-ray fluorescence imaging (FF-XRF). X-ray optics for FF-XRF can be manufactured with…
New materials made through controlled assembly of dispersed cellulose nanofibrils (CNF) has the potential to develop into biobased competitors to some of the highest performing materials today. The performance of these new cellulose…
The modulation transfer function (MTF) is widely used to characterise the performance of optical systems. Measuring it is costly and it is thus rarely available for a given lens specimen. Instead, MTFs based on simulations or, at best, MTFs…
We present a direct experimental investigation of the optical field distribution around a suspended tapered optical nanofiber by means of a fluorescent scanning probe. Using a 100 nm diameter fluorescent bead as a probe of the field…
Online measurement of diameters and concentricities of optical fibre layers, and the coating layer in particular, is one of the challenges in fibre manufacturing. Currently available instruments can measure concentricity and diameter of…
We introduce an efficient computational scheme based on Macro Basis Function (MBF) method, to analyze the scattering of a plane wave by the V-shaped plasmonic optical nano-antennas. The polarization currents and the scattered fields for…
We present a novel technique for measuring the characteristics of a magneto-optical trap for cold atoms by monitoring the spontaneous emission from trapped atoms coupled into the guided mode of a tapered optical nanofiber. We show that the…
Scattering scanning near-field optical microscopy enables optical imaging and characterization of plasmonic devices with nanometer-scale resolution well below the diffraction limit. This technique enables developers to probe and understand…
A two-dimensional photonic crystal semiconductor microcavity with a quality factor Q ~ 40,000 and a modal volume Veff ~ 0.9 cubic wavelengths is demonstrated. A micron-scale optical fiber taper is used as a means to probe both the spectral…
Scattering-type scanning near-field optical microscopy (s-SNOM) is instrumental in exploring polaritonic behaviors of two-dimensional (2D) materials at the nanoscale. A sharp s-SNOM tip couples momenta into 2D materials through phase…
Tapered optical fibers (TFs), with diameters gradually reduced from hundreds of microns to the micron scale, offer key advantages over conventional flat optical fibers (FFs), including uniform illumination, efficient long-range signal…