相关论文: CFD-DEM modeling of fracture initiation with polym…
The initiation of fluid-induced fracture in formations of permeable geomaterials subjected to quasi-stationary flow processes (drained response) can be strongly affected by Biot's coefficient and the size of the formation. The aim of this…
In fractured poroelastic media under high differential stress, the shearing of fractures and faults and the corresponding propagation of wing cracks can be induced by fluid injection. Focusing on low-pressure stimulation with fluid…
Modeling coupled processes in fractured porous media -- flow, deformation, fracture mechanics, and thermal/chemical effects -- often relies on mixed dimensional multiphysics formulations. These systems are nonlinear and depend on physical…
Frictional instabilities in fluid saturated granular materials underlie natural hazards, including submarine landslides and earthquake initiation. Experiments show distinct failure behaviors under subaerial and subaqueous conditions due to…
This paper studies a two-phase material with a microstructure composed of a hard brittle reinforcement phase embedded in a soft ductile matrix. It addresses the full three-dimensional nature of the microstructure and macroscopic…
The last decade has seen a strong increase of research into flows in fractured porous media, mainly related to subsurface processes, but also in materials science and biological applications. Connected fractures totally dominate…
Granular intrusion is commonly observed in natural and human-made settings. Unlike typical solids and fluids, granular media can simultaneously display fluid-like and solid-like characteristics in a variety of intrusion scenarios. This…
Displacement flows are common in hydraulic fracturing, as fracking fluids of different composition are injected sequentially in the fracture. The injection of an immiscible fluid at the center of a liquid-filled fracture results in the…
During hydraulic fracturing, the injection of a pressurized fluid in a brittle elastic medium leads to the formation and growth of fluid-filled fractures. A disc-like or penny-shaped fracture grows radially from a point source during the…
Fracture propagation is highly sensitive to the conditions at the crack tip. In heterogeneous materials, microscale obstacles can cause propagation instabilities. Macroscopic heterogeneities modify the stress field over scales larger than…
This paper presents several test cases intended to be benchmarks for numerical schemes for single-phase fluid flow in fractured porous media. A number of solution strategies are compared, including a vertex and a cell-centered finite volume…
We perform a detailed theoretical study of the edge fracture instability, which commonly destabilises the fluid-air interface during strong shear flows of entangled polymeric fluids, leading to unreliable rheological measurements. By means…
The present work deals with the numerical resolution of coupled 3D-2D problems arising from the simulation of fluid flow in fractured porous media modeled via the Discrete Fracture and Matrix (DFM) model. According to the DFM model,…
During the hydraulically induced compaction of a granular layer fracture patterns arise. In numerical simulations we study how these patterns depend on the gas properties as well as on the properties of the porous medium. In particular the…
Fluid-induced slip of fractures is characterized by strong multiphysics couplings. Three physical processes are considered: Flow, rock deformation and fracture deformation. The fractures are represented as lower-dimensional objects embedded…
In this work, we analyze the flow filtration process of slightly compressible fluids in porous media containing man made fractures with complex geometries. We model the coupled fracture-porous media system where the linear Darcy flow is…
We study experimentally the fracture mechanisms of a model cohesive granular medium consisting of glass beads held together by solidified polymer bridges. The elastic response of this material can be controlled by changing the cross-linking…
We applied a hybrid-dimensional flow model to pressure transients recorded during pumping experiments conducted at the Reiche Zeche underground research laboratory to study the normal opening behavior of fractures due to fluid injection.…
Flow in fractured porous media represents a challenge for discretization methods due to the disparate scales and complex geometry. Herein we propose a new discretization, based on the mixed finite element method and mortar methods. Our…
In this paper, we introduce a mortar-based approach to discretizing flow in fractured porous media, which we term the mixed-dimensional flux coupling scheme. Our formulation is agnostic to the discretizations used to discretize the fluid…