相关论文: Voltage deficit in solar cells with suppressed rec…
The incorporation of even small amounts of strontium (Sr) into lead-based quadruple cation hybrid perovskite solar cells results in a systematic increase of the open circuit voltage (Voc) in pin-type perovskite solar cells. We demonstrate…
The thickness dependences of the photocurrent quantum yield and photoenergy parameters of silicon backside contact solar cells (BC SC) are investigated theoretically and experimentally. The surface recombination rate on the irradiated…
We introduce a limit for the strength of coupling light into the modes of solar cells. This limit depends on both a cell's thickness and its modal properties. For a cell with refractive index n and thickness d, we obtain a maximal coupling…
Theoretically and experimentally we have proved the existence of optimal thickness of the porous layer used as an anti-reflection coating in solar cells. We have taken into account the joint mechanisms of generation and recombination of…
In organic bulk heterojunction solar cells, the donor/acceptor interfacial energy offset ($\Delta E$) is found to provide the driving force for efficient charge separation which gives rise to high short circuit current density…
CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed…
Recombination through quantum dots (QDs) is a major factor that limits efficiency of QD intermediate-band (IB) solar cells. Our proposal for a new IB solar cell based on type-II GaSb QDs located outside the depletion region of a GaAs…
The increase of cell efficiency resulting from using a diffraction grating as a back reflector is investigated. An enhancement coefficient is introduced as a figure of merit that accounts for the ability of the rear grating to increase the…
Sb2S3 is a promising material for low-toxicity, high-stability next-generation photovoltaics. Despite high optical limits in efficiency, progress in improving its device performance has been limited by severe voltage losses. Recent…
Energy level diagrams in organic electronic devices play a crucial role in device performance and interpretation of device physics. In the case of organic solar cells, it has become routine to estimate the photovoltaic gap of the…
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic…
Under open-circuit condition, the current is not extracted and the photogenerated carriers in principle disappear only by recombination. We study the open-circuit voltage $V_{\rm OC}$ and transient photovoltage under the effect of bulk…
We discuss the origin of Warburg's impedance in electrolytic cells containing only one group of positive and one group of negative ions. Our analysis is based on the Poisson-Nernst-Planck model, where the generation-recombination phenomenon…
Tandem solar cells can better harness the energy of the solar spectrum. Chalcopyrite solar cells have drawn attention, being the only highly efficient devices with bandgap around 1.0 eV, suitable for bottom cells. In the quest for better…
The theoretical analysis of photovoltaic conversion efficiency of highly effective silicon solar cells (SC) is performed for n-type and p-type bases. The case is considered when the Shockley-Read-Hall recombination in the silicon bulk is…
Despite the remarkable progress in emerging solar cell technologies such as hybrid organic-inorganic perovskites, there are still significant limitations related to the stability of the devices and their non-ideal electrical behavior under…
Traditional CdS buffer layer in selenium-free Cu(In,Ga)S2 solar cells leads to reduced open-circuit voltage because of a negative conduction band offset at the Cu(In,Ga)S2/CdS interface. Reducing this loss necessitates the substitution of…
We report on the non-trivial field dependence of charge carrier recombination in an organic blend at low temperatures. A new microwave resonance technique for monitoring charge recombination in organic semiconductors at low temperatures is…
In this perspective, we explore the insights into the device physics of perovskite solar cells gained from modeling and simulation of these devices. We discuss a range of factors that influence the modeling of perovskite solar cells,…
Antimony selenide (Sb2Se3) is at the forefront of an emerging class of sustainable photovoltaic materials. Despite notable developments over the past decade, the light-to-electricity conversion efficiency of Sb2Se3 has reached a plateau of…