相关论文: Real-time buffer gas pressure tuning in a micro-ma…
This paper proposes a correction method, which corrects the actual compressor performance in real operating conditions to the equivalent performance under specified reference condition. The purpose is to make fair comparisons between actual…
Sensors based on whispering gallery resonators have minute footprints and can push achievable sensitivities and resolutions to their limits. Here, we use a microbubble resonator, with a wall thickness of 500 nm and an intrinsic Q-factor of…
Pulse self-compression is a simple and economical method for improving the peak power of ultra-intense laser pulses. By solving a modified nonlinear Schrodinger equation considering the fifth-order susceptibility, we found that…
During laser micro-polishing, the constant control of laser energy density is a key technology to improve the surface roughness. In this paper, a method which controls the energy density of UV(ultraviolet) pulse laser in real time with the…
We theoretically investigate a method for tuning a dissipation rate in an atom-cavity system. By inserting a nanotip into the cavity mode, we estimate that the cavity dissipation rate increases by a factor of approximately 20, due to the…
To match the growing demand for bio-methane production, anaerobic digesters need to embrace the co-digestion of different feedstocks; in addition, to improve the techno-economic performance, an optimal and time-varying adaptation of the…
Starting from a generic model of a pore/bulk mixture equilibrium, we propose a novel method for modulating the composition of the confined fluid without having to modify the bulk state. To achieve this, two basic mechanisms - sensitivity of…
Magnetic field imaging is a valuable resource for signal source localization and characterization. This work reports an optically pumped magnetometer (OPM) based on the free-induction-decay (FID) protocol, that implements microfabricated…
Lowering the noise level of short pulse lasers has been a long-standing effort for decades. Modeling the noise performance plays a crucial role in isolating the noise sources and reducing them. Modeling to date has either used analytical or…
This work expands on our recently introduced low Mach enthalpy method [1] for simulating the melting and solidification of a phase change material (PCM) alongside (or without) an ambient gas phase. The method captures PCM's volume change…
We report on the generation of pulses of a low-frequency squeezed vacuum with noise suppression >2 dB below the standard quantum limit in a hot resonant 87 Rb vapor with polarization self-rotation. We demonstrate the possibility to…
A novel method for doping plasmas in pulsed-power experiments with gaseous elements has been developed. A fast gas valve, a nozzle, and a skimmer are used to generate an ultrasonic gas beam that is injected into a planar-geometry…
Standard optical pump-probe methods analyze a system's temporal response to a laser pulse within sub-femtoseconds to several nanoseconds, constrained by the optical delay line's length. While resistance is a sensitive detector in various…
The behavior of a dynamical system can exhibit abrupt changes when it crosses a tipping point. To prevent catastrophic events, it is useful to analyze indicators of the incoming bifurcation, as the divergence of the relaxation time of the…
The lithium vapor box divertor aims to detach the divertor plasma via evaporating and condensing lithium surfaces. By evaporating lithium near or at the divertor plate and condensing it closer to the main chamber, a lithium vapor density…
Microgravity mass gauging has gained increasing importance in recent years due to the acceleration in planning for long-term space missions as well as in-space refueling and transfer operations. It is of particular importance with cryogenic…
Micropumps are one of the most important parts of a microfluidic system. In particular, for biomedical applications such as Lab-on-Chip systems, micropumps are used to transport and manipulate test fluids in a controlled manner. In this…
Atomic vapor of four different paramagnetic species: gold, silver, lithium, and rubidium, is produced and studied inside several buffer gases: helium, nitrogen, neon, and argon. The paramagnetic atoms are injected into the buffer gas using…
A dichroic atomic vapor laser lock (DAVLL) system exploiting buffer-gas-filled millimeter-scale vapor cells is presented. This system offers similar stability as achievable with conventional DAVLL system using bulk vapor cells, but has…
Manipulation of intense pulse propagation in gas-filled capillaries is desirable for various high-field applications. Tuning the parameters of the driving laser pulse and the working gas is the conventional approach, and it provides limited…