相关论文: Electro optic effect measurements for waveguide in…

Femtosecond laser pulse systems allows to modify in a precise and permanent way the optical properties of atransparent materials. This process enables the direct writing of guiding structures in materials, commonlyknown as waveguides, which…

We present a practical approach to the numerical optimisation of the guiding properties of buried microstructured waveguides, which can be fabricated in a z-cut lithium niobate (LiNbO3) crystal by the method of direct femtosecond laser…

This study reports the successful fabrication of high-positive refractive index change waveguides, exceeding 0.02 in fluoride glasses, marking a significant advancement in integrated optical components for visible to mid-infrared…

We report on fabrication of tubular optical waveguides buried in ZBLAN glass based on transverse femtosecond laser direct writing. Irradiation in ZBLAN with focused femtosecond laser pulses leads to decrease of refractive index in the…

Low loss, optical channel waveguides have been successfully produced by high repetition rate, femtosecond laser inscription in a Li-Zn fluoroborate glass (64.9B2O3 + 25Li2O + 10ZnF2 + 0.1Er2O3). High quality waveguides were produced at 500…

We demonstrate a novel, composite laser written 3D waveguide, fabricated in boro-aluminosilicate glass, with a refractive index contrast of 1.12 x 10^-2. The waveguide is fabricated using a multi-pass approach which leverages the respective…

Writing optical waveguides with femtosecond laser pulses provides the capability of forming three-dimensional photonic circuits for manipulating light fields in both linear and nonlinear manners. To fully explore this potential, large…

We demonstrate integrating a high quality factor lithium niobate microdisk resonator with a free-standing membrane waveguide. Our technique is based on femtosecond laser direct writing which produces the pre-structure, followed by focused…

Currently, direct-write waveguide fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics. Devices such as buried waveguides, power splitters, couplers, gratings and optical…

We demonstrate electro-optic tuning of an on-chip lithium niobate microresonator with integrated in-plane microelectrodes. First two metallic microelectrodes on the substrate were formed via femtosecond laser process. Then a high-Q lithium…

We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low…

Electro-optical modulation is widely employed for optical signal processing and in laser technology. To date, it is efficiently realized in integrated photonic systems as well as in bulk optics devices. Yet, the achievement of modulators…

Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to…

Waveguide-based interferometric circuits are widely employed in optical communications, sensing and computing applications. In particular, glass-based devices are appealing due to the transparency and bio-compatibility of this substrate, or…

We report fabrication of optical waveguides embedded in oxidised porous silicon in a mask-less process. Patterned pore-filling was attained by means of inkjet printing, enabling lateral modification of the waveguide's index of refraction…

A promising solution for scalable integrated optics of trapped-ion quantum processors are curved waveguides guiding visible light within sapphire bulk material. To the best of our knowledge, no curved waveguides were investigated in…

We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the…

We report fabrication of low loss single mode waveguides on lithium niobate on insulator (LNOI) cladded by a layer of SiO2. Our technique, termed photolithography assisted chemo-mechanical etching (PLACE), relies on patterning of a chromium…

We report on an 800 nm femtosecond laser beam induced giant refractive index modulation and enhancement of near-infrared transparency in topological insulator material Bi2Te3 thin films. An ultrahigh refractive index of up to 5.9 was…

We report on the wafer scale fabrication of single mode low-loss lithium niobate on insulator waveguides utilizing a chemically amplified resist and an optimized dry etching method. The fabricated single mode waveguides are free of…