相关论文: Differential Spiral Joint Mechanism for Coupled Va…
Stroke-induced motor impairment often results in substantial loss of upper-limb function, creating a strong demand for rehabilitation robots that enable safe and transparent physical human-robot interaction (pHRI). Variable stiffness…
Based on the idea of variable stiffness mechanisms, a variety of such mechanisms is shown in this work. Specifically, 2-DOF parallel kinematic machines equipped with redundant actuators and non-linear springs in the actuated joints are…
Active control of the shape of soft robots is challenging. Despite having an infinite number of passive degrees of freedom (DOFs), soft robots typically only have a few actively controllable DOFs, limited by the number of degrees of…
Compliance in actuation has been exploited to generate highly dynamic maneuvers such as throwing that take advantage of the potential energy stored in joint springs. However, the energy storage and release could not be well-timed yet. On…
Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to…
Reinforcement-learned locomotion enables legged robots to perform highly dynamic motions but often accompanies time-consuming manual tuning of joint stiffness. This paper introduces a novel control paradigm that integrates variable…
This paper introduces a novel variable stiffness mechanism termed Helically Wound Structured Electrostatic Layer Jamming (HWS-ELJ) and systematically investigates its potential applications in variable stiffness robotic finger design. The…
Variable Stiffness Actuators prove invaluable for robotics applications in unstructured environments, fostering safe interactions and enhancing task adaptability. Nevertheless, their mechanical design inevitably results in larger and…
The purpose of this research is to design, fabricate and test a tendon driven a continuum soft robot with three modular segments, each of which has a tunable stiffness enabled by layer jamming technology. Compared with previous studies, the…
Inflated continuum robots are promising for a variety of navigation tasks, but controlling their motion with a small number of actuators is challenging. These inflated beam robots tend to buckle under compressive loads, producing extremely…
Vine-inspired robots achieve large workspace coverage through tip eversion, enabling safe navigation in confined and cluttered environments. However, their deployment in free space is fundamentally limited by low axial stiffness, poor…
In this paper, a method for stabilizing biped robots stepping by a combination of Divergent Component of Motion (DCM) tracking and step adjustment is proposed. In this method, the DCM trajectory is generated, consistent with the predefined…
Continuum robots are well suited for constrained environments but suffer from low distal stiffness, resulting in large posture errors under external loads. In this paper, we propose a novel structural primitive, the Distal-Stable Beam,…
With a slender redundant body, the tendon-driven robot (TDR) has a large workspace and great maneuverability while working in complex environments. TDR comprises multiple independently controlled robot segments, each with a set of driving…
The paper focuses on the stiffness modeling of a new type of compliant manipulator and its non-linear behavior while interacting with the environment. The manipulator under study is a serial mechanical structure composed of dualtriangle…
Continuum robots have gained widespread popularity due to their inherent compliance and flexibility, particularly their adjustable levels of stiffness for various application scenarios. Despite efforts to dynamic modeling and control…
Variable stiffness is a key capability in biological and robotic systems, enabling adaptive interaction across tasks and environments. Mechanical metamaterials offer an alternative to conventional mechatronic solutions by encoding stiffness…
It is common to manufacture an object by decomposing it into parts that can be assembled. This decomposition is often required by size limits of the machine, the complex structure of the shape, etc. To make it possible to easily assemble…
Springs are commonly used in wearable robotic devices to provide assistive joint torque without the need for motors and batteries. However, different tasks (such as walking or running) and different users (such as athletes with strong legs…
This study introduces an innovative design for a Variable Stiffness 3 Degrees of Freedom actuated wrist capable of actively and continuously adjusting its overall stiffness by modulating the active length of non-linear elastic elements.…