相关论文: Optical linear-nonlinear and dispersion parameters…

Tin Sulphide (SnS) thin films have been recognized as a potential candidate for solar cells. Many fabrication techniques have been used to grow SnS thin films. The band-gap, ${\rm E_g}$ of SnS films as reported in literature, were found to…

Tin Sulphide is a layered compound which retains its structure when deposited as thin films by thermal evaporation. The films were found to have oriented growth with the direction of orientation changing with film thickness. The film's…

In terms of mixing graded TiO2 and SnO2 powders by solid-state reaction method, ITO was prepared. Using electron beam gun technology, ITO films with different thicknesses were prepared. The influence of film thickness on structure,…

Coating and reflecting thin films for energy harvesting purposes are interesting topics in both theoretical and experimental research. The thin film could help to enhance the absorption of the system via its specific optical properties…

Thin films of inorganic materials as Tin-doped indium oxide, titanium oxide, Niobium doped titanium oxide, were deposited for comparison on glass and Polyethylene terephthalate (PET) substrates with a DC sputtering method. These thin films…

Tin sulfide (SnS) has garnered much attention as a promising material for various applications, including solar cells and thermoelectric devices, owing to its favorable optical and electronic properties and the abundant and nontoxic nature…

Tin sulphide thin films of p-type conductivity were grown on glass substrates. The refractive index of the as grown films, calculated using both Transmission and ellipsometry data were found to follow the Sellmeier dispersion model. The…

We present the intrinsic optical properties over a broad spectral range of TiN thin films deposited on a Si/SiO$_2$ substrate. We analyze the measured reflectivity spectra of the film-substrate multilayer structure within a well-establish…

Simple vacuum evaporation technique for deposition of dyes on various solid surfaces has been developed. The method is compatible with conventional solvent-free nanofabrication processing enabling fabrication of nanoscale optoelectronic…

ZrO2:10%SiO2 thinfilms have been deposited on fused silica substrate by reactive electron beam co-evaporation technique at different oxygen partial pressure. The structural analysis shows tetragonal phase with residual tensile stress in the…

High quality vanadium sesquioxide V2O3 films (170-1100 {\AA}) were grown using the pulsed laser deposition technique on (0001)-oriented sapphire substrates, and the effects of film thickness on the lattice strain and electronic properties…

In the present work performance of cesium iodide thin film photocathode is studied in detail. The optical absorbance of cesium iodide thin films have been analyzed in the spectral range of 190 nm to 900 nm. The optical band gap energy of…

Structural and optical studies have been performed on the thermally-evaporated "as-deposited" and "humid air aged" CsI thin films. The structural analysis for both "as-deposited" and "humid air aged" films shows a well-oriented peaks…

This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…

The effects of 200-MeV Ag^{+15} ion irradiation on the optical properties of TiO_{2} and SnO_{2} thin films prepared by using the RF magnetron sputtering technique were investigated. These films were characterized by using UV-vis…

We report on the realization of silicon nitride membranes with enhanced and electrically tunable reflectivity. A subwavelength one-dimensional grating is directly patterned on a suspended 200 nm-thick, high stress commercial film using…

The temperature dependences of the total, crystal lattice and electronic thermal conductivities were investigated in films of topological insulators p-Bi$_{0.5}$Sb$_{1.5}$Te$_{3}$ and p-Bi$_{2}$Te$_{3}$ formed by discrete and thermal…

The present paper discusses the influence of Tin Sulphide's grain size on the performance of ITO/PEDOT:PSS/SnS/Al structured solar cells fabricated by thermal evaporation. The grain sizes were maintained in the range of 11-18~nm by…

SnS2 stands out as a highly promising two-dimensional material with significant potential for applications in the field of electronics. Numerous attempts have been undertaken to modulate the physical properties of SnS2 by doping with…

To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…